• Facebook
  • Linkedin
  • Youtube
  • Twitter
packaging testing equipment Water Vapor Permeation Tester
Products
Home /

Hide

/

Testing solutions for Facial Mask

/Mask Bacterial Filtration Efficiency (BFE) Tester - GB-XF1000

Mask Bacterial Filtration Efficiency (BFE) Tester - GB-XF1000

It is used to test the percentage of materials containing bacteria suspended particles at the specified flow rate.

  • Brand:

    GBPI
  • Item NO.:

    GB-XF1000
  • Payment:

    T/T
  • Product Origin:

    Guangzhou
  • Shipping Port:

    Guangzhou
  • Lead Time:

    30-50
Inquiry now Download
Product Detail

Application


It is used to test the percentage of materials containing bacteria suspended particles at the specified flow rate. The dual gas path simultaneous comparison sampling method is used to improve the accuracy of sampling, which is suitable for the performance testing of bacterial filtration efficiency of medical surgical masks by metrological inspection departments, scientific research institutes, medical mask manufacturers and other relevant departments.


Medical Masks bacterial filtration efficiency tester also called BFE test machine is to determine the bacterial filtration efficiency (BFE) of medical face mask materials by employing a ratio of the upstream bacterial challenge to downstream residual concentration of the tested medical face mask materials. The tester provides certain flow rate of bacterial aerosol. The operator can measure the number of colony forming units passing through the medical face mask material, which is clamped between a six-stage Anderson cascade impactor and an aerosol chamber, expressed as a percentage of the number of colony forming units present in the challenge aerosol.

Standards

YY0469-2004、YY/T 0969-2013、ASTMF2100、ASTMF2101、EN14683


Specifications: 


Key Specification

 

Specification Range

Resolution

Accuracy

A Route Sampling Flow

28.3L/min

0.1L/min

Within ± 2.%

B Route Sampling Flow

28.3L/min

0.1L/min

Within ±2.%

Spray Flow

(0.1~10)L/min

0.1L/min

Within ±2.5%

Peristaltic Pump Flow

(0.001~3.0)mL/min

0.001ml/min

Within ±2.5%

Front Pressure of A Route Sampling Flowmeter

(-20~0)kPa

0.01kPa

Within ±2.5%

Front Pressure of B Route Sampling Flowmeter

(-20~0)kPa

0.01kPa

Within ±2.5%

Front Pressure of Spray  Flowmeter

(0~300)kPa

0.1kPa

Within ±2.5%

Ambient Temperature

(-40~99)

0.1

Within ±2.5%

Negative Pressure of the Aerosol Chamber

(-90~-120)Pa

0.1Pa

Within ±2.0%

Negative Pressure of the Cabinet

 

-50~-200pa

Data Storage Ability

>100000 sets


Vortex Mixer Test Tube Specification and Quantity


Φ16×150mm test tube8pcs


High Efficiency Particulate Air Filter Properties

Filter Efficiency≥99.99% for particles> 0.3μm

Median diameter of aerosol generator mass

Average diameter: (3.0±0.3)μm; Geometric Standard Deviation≤1.5

Double Routes 6-lever Andersen Sampling apparatus

Level1>7μm;          Level 2: (4.7~7)μm;

Level 3: (3.3~4.7)μm;  Level 4: (2.1~3.3)μm;

Level 5: (1.1~2.1)μm;  Level 6: (0.6~1.1)μm

Size of Aerosol Chamber

 

600×85×3mm (Length×Diameter×Thickness)

Total number of positive quality control sampler particles

 

(2200±500)cfu

Negative Chamber Flow Speed

≥5m3/min

Size of Negative Pressure Chamber Door(W×D)

1000×730mm 

Size of Main Machine(W×D×H)

1180×650×1300mm  

Size of Supporting Frame(W×D×H)

1180×650×600mm, Height within 10cm is adjustable

Noise of the Tester

<65dB(A)

Weight

 

150kg

Power Supply

AC220V±10%, 50Hz

Power Consumption

 

<1500W


Features 

1. Negative pressure experiment system to ensure the safety of operators;

2. Negative pressure cabinet with built-in peristaltic pump and A and B two-way six-stage Andersen;

3. The flow rate of the peristaltic pump can be set;

4. Dedicated microbial aerosol generator can set the volume of bacterial liquid spray flow, and the atomization effect is good;

5. Embedded high-speed industrial microcomputer control;

6.10.4-inch industrial-grade high-brightness color touch display;

7, USB interface, support U disk data transfer;

8. Built-in high-brightness lighting in the cabinet;

9. Built-in leakage protection switch to protect operator safety;

10. Insulation and flame retardant between inner and outer layers;

11. The front switch glass door is convenient for experimenters to observe and operate;

12. Detachable stand, the height of stand is adjustable;

13. Support and move dual-purpose casters.


Note: GBPI is always committed to product innovation and improved performance, so accordingly product technical specifications are subject to change without notice. GBPI reserves the right to amend and the final power of interpretation.





Send A Message

Leave us a message, we will get back to you ASAP.

Related Products
mask testing instrument Disposable medical mask respiratory resistance tester
The respiratory resistance tester is suitable for determining the inhalation resistance and exhalation resistance under the regulations of respirators and masks, and for the related testing and inspection of ordinary mask products by the national labor protection equipment inspection agency manufacturer.
Disinfection Equipment Mobile Atomizing Humidification And Disinfection Equipment - GB-D100
For disinfection of large spaces. Removable aerosol disinfection and sterilization equipment, manual and automatic control, timing and quantitative spraying, adjustable spray volume Suitable for hospitals, campuses, stations, airports, and other large public places. Under the action of compressed air, the medicinal solution is spouted from the nozzle to form aerosol ions of 2 to 10 μm, which quickly and fully integrates in the ambient air; kills pathogenic microorganisms in the air, and realizes a full range of dead space-free disinfection of the environmental space. Sterile environment. The sterilized objects will not form dew condensation and form droplets.
mask testing machine Facial Mask Flame Retardant Tester - GB-ZR10
Face Mask Flame Retardant Tester is a special test instrument for the flame retardancy of a mask. Mask testing machines for surgical face masks, N95 masks, Melt-blown fabric.
Exhalation Valve Air Tightness Tester Medical Mask Exhalation Valve Air Tightness Tester - GB-HQ1000
Medical Mask Exhalation Valve Air Tightness Tester  is Used to detect the air tightness of the mask breath valve. GBPI offers mask testing machines for surgical face masks, N95 masks, Melt-blown fabric. BFE Tester, PFE Tester, N95 Tester, Melt-blown fabric Tester
 Face Mask Particulate Filtration Efficiency Tester Face Mask Particulate Filtration Efficiency Tester
GBPI offers mask testing machines for surgical face masks, N95 masks, Melt-blown fabric. BFE Tester, PFE Tester, N95 Tester, Melt-blown fabric Tester
Ethylene Oxide Residuals Face Mask Ethylene Oxide (EO) Residuals Testing Gas Chromatography
GC9802-K Face Mask Ethylene Oxide (EO) Residuals Testing Gas Chromatography has a reasonable structure, stable and reliable performance, simple operation and convenient maintenance. Can be widely used in petroleum, chemical industry, pesticides, medicine and health, commodity inspection, environmental protection, universities and other production and scientific research departments. It can be used to detect ethylene oxide and other organic solvents. Detects purity or content of a single solvent
synthetic blood penetration tester Mask Synthetic Blood Penetration Tester
It is suitable for the resistance of the mask to the penetration of synthetic blood under different levels of test pressure. The mask material is tested with synthetic blood under continuously applied pressure, and the penetration of synthetic blood on the material is visually checked.
Face mask tester Multifunctional Tensile Tester for Face Mask - GBH-3
To test the tensile strength, peeling strength, heat sealing strength, tearing strength, piercing strength of plastic film, composite film, tape, soft packaging material, rubber sheets, paper, non-woven fabrics and other packaging materials
Face Mask Differential Pressure Tester Face Mask Air Flow Resistance and Differential Pressure Tester - GBN701
Used for face mask air flow resistance and differential pressure testing to check breathability and can also be used to check differential pressure of textile materials gas exchanger.
PFE tester ASTM F2299/Mask Particle Filtration Efficiency (PFE) Tester
Face Mask Particulate Filtration Efficiency is to test the filtering efficiency of particulate protective masks . This instrument conforms to ASTM F2299, NIOSH-42CFR-84, GB 2626-2019, YY 0469-2011 and GB/T32610-2016 standard. GBPI offers mask testing machines for surgical face masks, N95 masks, Melt-blown fabric. BFE Tester, PFE Tester, N95 Tester, Melt-blown fabric Tester.
Professional GB-KF30010  Medical ProtectionTextile Mask Particulate Filtration Efficiency Tester supplier GB-KF30010 Medical ProtectionTextile Mask Particulate Filtration Efficiency Tester
Application It is to test the filtering efficiency of particulate protective masks and medical masks and to determine the resistance of ordinary fabrics and medical protective masks to the constant flow of airflow.
Lab  Teser Use for fabric China meltblown tester ppe testing equipment for fabric viral filtration efficiency tester
It is used to test the percentage of materials containing bacteria suspended particles at the specified flow rate. The dual gas path simultaneous comparison sampling method is used to improve the accuracy of sampling, which is suitable for the performance testing of bacterial filtration efficiency of medical surgical masks by metrological inspection departments, scientific research institutes, medical mask manufacturers and other relevant departments.
  • Facebook
  • Linkedin
  • Youtube
  • Twitter

Copyright @ 2024 Guangzhou Biaoji Packaging Equipment Co.,Ltd. All Rights Reserved.

Chat now

Inquiry Now

Home

Products

News

contact