packaging testing equipment Water Vapor Permeation Tester
Search
Home / Search
  • migration tester
    Full-Automatic Overall Migration Tester AUTO ZF3600

     

    AUTO ZF3600 Total Migration & Non-Volatile Residue Tester

    Full-automatic Evaporation Residue & Loss on Drying Analyzer for Pharmaceutical, Food Contact, Chemical & Water Quality Testing

    Need technical datasheet, quotation or application support?

    Get free consultation from GBPI's testing instrument experts.

    Click for Free Consultation

    Introduction

    The AUTO ZF3600 Total Migration & Non-Volatile Residue Tester adopts an integrated system design of water bath evaporation, heating drying, cooling and constant-weight weighing. The whole test process runs fully automatically without manual operation. It is suitable for total migration (non-volatile residue, evaporation residue) tests in purified water, pharmaceutical packaging materials, food contact materials, cigarette tipping paper, chemical reagents and other fields. It can also be used for moisture content and loss on drying of solid samples, as well as total dissolved solids testing in water quality inspection.

    Test Principle

    Transfer the test solution into the solvent dish of the automatic feeding system. The empty dish is heated, cooled and weighed according to the set temperature. Repeat the steps until the constant weight is reached. The solution is evaporated to dryness in a water bath below the boiling point of the immersion liquid. The chamber is heated to 105℃ for drying and then cooled. After the evaporating dish is cooled, the balance judges the constant weight, and the experiment ends once the constant weight requirement of the test item is satisfied.

    Schematic Diagram of Principle

    Principle Schematic

    Compliance Standards

    • Purified Water: Purified Water in Chinese Pharmacopoeia Volume II, EP9.0 WATER, PURIFIED
    • Pharmaceutical Packaging: Non-volatile residue item in extractables test of National Pharmaceutical Packaging Material Standard
    • Food Contact Materials: GB 31604.8-2021, EN 1186-3:2002 method A, Standards and Specifications for Utensils, Containers and Packages of Korea Ministry of Health and Welfare chapter IV 2-8
    • Cigarette Tipping Paper: YQ/T 59-2015
    • Chemical Reagents: GB/T 9740-2008, ISO 759
    • Water Quality: GB 8538-2016, DZT0064.9-2021, GB/T 14415-2007, GB/T 5750.4-2006
    • Solid Samples: Extractables and Loss on Drying in Chinese Pharmacopoeia Volume IV, USP40-NF35<921> WATER DETERMINATION

    Specifications

    Item Technical Parameters
    Measuring Range 0 g ~ 80 g
    Balance Resolution 0.1 mg
    Balance Weighing Range 0 g ~ 220 g
    Constant Weight Tolerance 0.3 mg, adjustable
    Water Bath Temperature Range Ambient ~ 100℃
    Oven Temperature Range Ambient ~ 125℃
    Temperature Control Accuracy ±0.5℃
    Number of Sample Positions 36
    Evaporating Dish Volume 100 mL
    Gas Port Size Φ8 mm
    Overall Dimension 1200 mm(L) × 850 mm(W) × 1335 mm(H)
    Power Supply 220V,50Hz
    Rated Power 7000 W
    Operation System Windows 10 Pro 64-bit

    Features

    Dual-temperature Integrated Control System, Upgraded Automation

    Integrated workflow of water bath evaporation, drying, cooling and constant weight for automatic, efficient and precise testing. Adopts automatic feeding mechanism controlled by pneumatic valve with residual volume less than 0.1 mL, no waiting or manual attendance required. Built-in water bath with liquid level sensor for automatic water level detection, water filling, draining and temperature control.

    High-precision Imported Balances with Isolation Protection

    Equipped with 3 high-precision imported balances, constant weight of 0.3 mg can be achieved after two drying cycles. Balances are installed in a stable shield with water-circulation interlayer to keep stable temperature and humidity during weighing.

    High Throughput & Wide Compatibility

    36 independent test stations with separate data output to meet high-throughput testing needs. Compatible with purified water, n-hexane, ethanol, acetic acid, chloroform and other organic solvents.

    Cooling & Recovery System for Efficient Solvent Recycling

    Built-in circulating water cooling pump maintains low chamber temperature. Eco-friendly, cooling down to room temperature within 30 min. Equipped with solvent recovery bottle, solvent recovery rate over 90%.

    Intelligent Operating System, Global Compliance

    Real-time display of weighing data, temperature and humidity curves; data is automatically saved for query. Designed in accordance with GMP annex for computerized systems, flexible parameter setting for different standards. Audit trail function for full data traceability, user permission management available. Supports multiple data output formats, electronic signature and online report approval.

    Laboratory Intelligent IoT Platform

    The instrument can connect to the IoT platform for network digital management. Authorized users can remotely log into the IoT platform, access the instrument software interface, manage test data and perform remote fault diagnosis.

    Application

    Image Application Field Description
    Purified Water Purified Water Suitable for testing the non-volatile content of purified water and sterile water for injection in the pharmaceutical industry.
    Pharmaceutical Packaging Materials Pharmaceutical Packaging Materials Suitable for the test of non-volatile matter items in the dissolution test of plastic and rubber pharmaceutical packaging materials.
    Food Packaging Materials Food Packaging Materials Suitable for various food utensils, containers and food packaging films, cans or other various food tools, pipes and other products made of polyethylene, polystyrene, polypropylene, perchlorinated vinyl resin as raw materials in different food simulants. Determination of total migration after immersion.
    Cigarette Pack Materials Cigarette Pack Materials Suitable for total migration test of cigarette tipping paper soaking solution.
    Chemical Reagent Chemical Reagent Suitable for the evaporation residue test of chemical reagents, such as ethanol, acetic acid, n-hexane, chloroform and other organic solvents whose boiling point is lower than 100℃.
    Domestic Water and Drinking Water, Industrial Water, Sewage Domestic Water and Drinking Water, Industrial Water, Sewage Suitable for the total dissolved solids test of drinking water, drinking natural mineral water, groundwater, drinking water, swimming pool water, urban sewage, industrial boiler water, etc.
    Solid Samples, Pharmaceutical Particles Solid Samples, Pharmaceutical Particles Suitable for loss on drying, dry content or moisture testing of solid samples, such as hollow capsules, noncrystalline cellulose and other pharmaceuticals or other solid particles.

    Ready to upgrade your total migration and non-volatile residue testing workflow?

    Contact GBPI today for datasheet, quotation and professional testing solution.

    Click for Free Consultation
    View More
  • migration testing in food packaging
    GBPI Migration Testing equipemnent In Food Plastic Packaging Migration & Non-volatile-matter Content Tester

     

    ZF3600 Full-automatic Total Migration Tester is applied to determinate the dissolution amount of packaging materials in different simulant soaking solutions.

    View More
  • migration tester
    Full-automatic Total Migration Tester -AUTO ZF1800G

     

    AUTO ZF1800G Total Migration & Non-Volatile Residue Tester

    Full-automatic Evaporation Residue & Loss on Drying Analyzer for Pharmaceutical, Food Contact, Chemical & Water Quality Testing

    Need technical datasheet, quotation or application support?

    Get free consultation from GBPI's testing instrument experts.

    Click for Free Consultation

    Introduction

    The AUTO ZF1800G Total Migration & Non-Volatile Residue Tester adopts an integrated system design of water bath evaporation, heating drying, cooling and constant-weight weighing. The whole test process runs fully automatically without manual operation. It is suitable for total migration (non-volatile residue, evaporation residue) tests in purified water, pharmaceutical packaging materials, food contact materials, cigarette tipping paper, chemical reagents and other fields. It can also be used for moisture content and loss on drying of solid samples, as well as total dissolved solids testing in water quality inspection.

    Test Principle

    Transfer the test solution into the solvent dish of the automatic feeding system. The empty dish is heated, cooled and weighed according to the set temperature. Repeat the steps until the constant weight is reached. The solution is evaporated to dryness in a water bath below the boiling point of the immersion liquid. The chamber is heated to 105℃ for drying and then cooled. After the evaporating dish is cooled, the balance judges the constant weight, and the experiment ends once the constant weight requirement of the test item is satisfied.

    Compliance Standards

    • Purified Water: Purified Water in Chinese Pharmacopoeia Volume II, EP9.0 WATER, PURIFIED
    • Pharmaceutical Packaging: Non-volatile residue item in extractables test of National Pharmaceutical Packaging Material Standard
    • Food Contact Materials: GB 31604.8-2016, EN 1186-3:2002 method A, Standards and Specifications for Utensils, Containers and Packages of Korea Ministry of Health and Welfare chapter IV 2-8
    • Cigarette Tipping Paper: YQ/T 59-2015
    • Baijiu: GB/T 10345-2022 Method of Analysis for Baijiu
    • Chemical Reagents: GB/T 9740-2008, ISO 759
    • Water Quality: GB 8538-2016, DZT0064.9-2021, GB/T 14415-2007, GB/T 5750.4-2006
    • Solid Samples: Extractables and Loss on Drying in Chinese Pharmacopoeia Volume IV, USP40-NF35<921> WATER DETERMINATION

    Specifications

    Item Technical Parameters
    Measuring Range 0 g ~ 80 g
    Balance Resolution 0.1 mg
    Balance Weighing Range 0 g ~ 220 g
    Constant Weight Tolerance 0.3 mg, adjustable
    Water Bath Temperature Range Ambient ~ 100℃
    Oven Temperature Range Ambient ~ 125℃
    Temperature Control Accuracy ±0.5℃
    Number of Sample Positions 18
    Evaporating Dish Volume 200 mL
    Gas Port Size Φ8 mm
    Overall Dimension 1200 mm(L) × 850 mm(W) × 1335 mm(H)
    Power Supply 220V,50Hz
    Rated Power 7000 W
    Operation System Windows 10 Pro 64-bit

    Features

    Dual-temperature Integrated Control System, Upgraded Automation

    Integrated workflow of water bath evaporation, drying, cooling and constant weight for automatic, efficient and precise testing. Adopts automatic feeding mechanism controlled by pneumatic valve with residual volume less than 0.1 mL, no waiting or manual attendance required. Built-in water bath with liquid level sensor for automatic water level detection, water filling, draining and temperature control.

    High-precision Imported Balances with Isolation Protection

    Equipped with 2 high-precision imported balances, constant weight of 0.3 mg can be achieved after two drying cycles. Balances are installed in a stable shield with water-circulation interlayer to keep stable temperature and humidity during weighing.

    High Throughput & Wide Compatibility

    18 independent test stations with separate data output to meet high-throughput testing needs. Compatible with purified water, n-hexane, ethanol, acetic acid, chloroform and other organic solvents.

    Cooling & Recovery System for Efficient Solvent Recycling

    Built-in circulating water cooling pump maintains low chamber temperature. Eco-friendly, cooling down to room temperature within 30 min. Equipped with solvent recovery bottle, solvent recovery rate over 90%.

    Intelligent Operating System, Global Compliance

    Real-time display of weighing data, temperature and humidity curves; data is automatically saved for query. Designed in accordance with GMP annex for computerized systems, flexible parameter setting for different standards. Audit trail function for full data traceability, user permission management available. Supports multiple data output formats, electronic signature and online report approval.

    Laboratory Intelligent IoT Platform

    The instrument can connect to the IoT platform for network digital management. Authorized users can remotely log into the IoT platform, access the instrument software interface, manage test data and perform remote fault diagnosis.

    Application

    Image Application Field Description
    Purified Water Purified Water Suitable for testing the non-volatile content of purified water and sterile water for injection in the pharmaceutical industry.
    Pharmaceutical Packaging Materials Pharmaceutical Packaging Materials Suitable for the test of non-volatile matter items in the dissolution test of plastic and rubber pharmaceutical packaging materials.
    Food Packaging Materials Food Packaging Materials Suitable for various food utensils, containers and food packaging films, cans or other various food tools, pipes and other products made of polyethylene, polystyrene, polypropylene, perchlorinated vinyl resin as raw materials in different food simulants. Determination of total migration after immersion.
    Cigarette Pack Materials Cigarette Pack Materials Suitable for total migration test of cigarette tipping paper soaking solution.
    Chemical Reagent Chemical Reagent Suitable for the evaporation residue test of chemical reagents, such as ethanol, acetic acid, n-hexane, chloroform and other organic solvents whose boiling point is lower than 100℃.
    Domestic Water and Drinking Water, Industrial Water, Sewage Domestic Water and Drinking Water, Industrial Water, Sewage Suitable for the total dissolved solids test of drinking water, drinking natural mineral water, groundwater, drinking water, swimming pool water, urban sewage, industrial boiler water, etc.
    Solid Samples, Pharmaceutical Particles Solid Samples, Pharmaceutical Particles Suitable for loss on drying, dry content or moisture testing of solid samples, such as hollow capsules, noncrystalline cellulose and other pharmaceuticals or other solid particles.

    Ready to upgrade your total migration and non-volatile residue testing workflow?

    Contact GBPI today for datasheet, quotation and professional testing solution.

    Click for Free Consultation
    View More
  • migration testing in food packaging
    Fully Automatic Overall Migration Tester-ZF900

    Full-Automatic Overall Migration Tester AUTO ZF900 has an integrated system design of water bath evaporation, heating and drying, drying and cooling, and constant temperature weighing. It is suitable for testing the total migration (non-volatile matter, evaporation residue) and other items in the fields of purified water, pharmaceutical packaging materials, food packaging, cigarette tipping paper and chemical reagents. It can also be applied to the water content, loss on drying and other items of solid samples, and the total dissolved solids content test in water quality testing.

    View More
  • migration tester
    ZF1800A Full-automatic Total Migration Tester

    full-automatic migration tester is specialized for testing dissolved non-volatile-matter of materials after soaked in specific solution.

    View More
  •  Evaporated Residues Tester
    ZF800B Automatic Evaporated Residues Tester

    Automatic Evaporated Residues Tester is pplicable to tableware, food containers, packaging films, bags, cap sealing rubber pad, painted coating for inner wall of cans or tins, plant fiber container and so on


    View More

A total of 1 pages

Contact Us

Call Us : +86 15820231129

Email Us : info@gbtest.cn

Address : No. 3 Linjiang Road, Huangpu District, Guangzhou, China

Send A Message

Leave us a message, we will get back to you ASAP.

  • Facebook
  • Linkedin
  • Youtube
  • Twitter

Copyright @ 2026 Guangzhou Biaoji Packaging Equipment Co.,Ltd. All Rights Reserved.

Chat now

Inquiry Now

Home

Products

NEWS

contact