MC‑D Migration Test Cell: Professional Pre‑Treatment Solution for Food‑Contact Material Migration Test GBPI MC‑D Migration Test Cell for Food‑Contact Material Migration Pre‑Treatment Address: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, GuangzhouTel: +86 15820231129 | Official Website: www.gbpitester.com Product Introduction MC‑D Migration Test Cell is suitable for pre‑treatment of migration tests for food‑contact materials and products. It meets the requirements of GB 5009.156‑2016 and applies to all non‑volatile food simulants specified in GB/T 23296.1‑2009, GB 31604.1‑2015 and other relevant standards. It provides standardized test conditions to support safety assessment for food‑contact specimens, widely adopted by third‑party laboratories, food packaging manufacturers and research institutes. Executive Standards To ensure test repeatability and global recognition, MC‑D Migration Test Cell conforms to both Chinese national standards and European normative requirements: GB/T 23296.1‑2009, EN13130‑1:2004, GB 5009.156‑2016, GB 31604.1‑2015, EN1186‑1:2002. It satisfies migration pre‑treatment requirements for domestic inspection and EU export certification. Core Technical Parameters Contact Mode Single‑sided contact Contact Area 99.17 cm² Contact Surface Diameter Φ112.4 mm Volume 300 mL Operating Temperature 5℃ ~ 120℃ Product Features • Designed and manufactured with reference to Type‑D cell in Appendix C of EN1186‑1:2002, Type‑D cell in Appendix D of GB/T 23296.1‑2009 and Type‑D cell in Appendix D of EN13130‑1:2004, ensuring consistency of migration test results. • This migration cell supports both migration‑cell method and total‑immersion method to meet diverse pre‑treatment requirements. • Constructed of premium borosilicate glass featuring high hardness, high light transmittance and excellent chemical stability. It is heat‑resistant with low matrix content and will not interfere with the determination of overall migration and specific migration values. • Adjustable stainless‑steel latches enable simple operation and reliable sealing. It prevents burst under high‑temperature conditions with various food simulants, guaranteeing test safety and stable migration results. • For non‑reflux immersion, the opening can be sealed and fixed directly with glass plug to carry out total‑immersion tests at ambient and high temperatures. • For reflux immersion, a condensation reflux tube can be directly connected to the ground‑glass joint for migration testing. Application Fields It applies to migration test pre‑treatment of food‑contact materials and products exposed to food simulants including water, acetic acid and ethanol. Conclusion MC‑D Migration Test Cell is a standard‑compliant auxiliary device for food‑contact material safety testing. Made of high‑performance borosilicate glass, it supports both migration‑cell and total‑immersion approaches, compatible with non‑reflux and reflux immersion workflows. With safe anti‑burst performance under high‑temperature testing, it delivers repeatable migration pre‑treatment results for lab QC, third‑party testing institutes and packaging manufacturers. It is essential hardware for food‑contact material compliance assessment both for domestic market and European export business. Get Quotation for This Unit GBPI Packaging Test Equipment ManufacturerAddress: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, Guangzhou, Guangdong, ChinaTel: +86 15820231129 | Official Website: www.gbpitester.com

MC‑C Migration Test Cell: Professional Pre‑Treatment Solution for Food‑Contact Material Migration Test GBPI MC‑C Migration Test Cell for Food‑Contact Material Migration Pre‑Treatment Address: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, GuangzhouTel: +86 15820231129 | Official Website: www.gbpitester.com Product Introduction MC‑C Migration Test Cell is suitable for pre‑treatment of migration tests for food‑contact materials and products. It meets the requirements of GB 5009.156‑2016 and applies to all non‑volatile food simulants specified in GB 31604.1‑2015, EN1186‑1 and other relevant standards. It provides standardized test conditions to support safety assessment for food‑contact specimens, widely adopted by third‑party laboratories, food packaging manufacturers and research institutes. Executive Standards To ensure test repeatability and global recognition, MC‑C Migration Test Cell conforms to both Chinese national standards and European normative requirements: GB 5009.156‑2016, GB 31604.1‑2015, GB/T 23296.1‑2009, EN1186‑1:2002, EN 13130‑1:2004. It satisfies migration pre‑treatment requirements for domestic inspection and EU export certification. Core Technical Parameters Contact Mode Single‑sided or Double‑sided contact Single‑sided Contact Area(Diameter) 51.5 cm² (Φ81 mm) Double‑sided Contact Area 103 cm² Volume 120 mL Operating Temperature 5℃～180℃ Overall Dimensions 143mm(L) × 125mm(W) × 76mm(H) Net Weight 1.2 kg Product Features • Complies with relevant standards, fully designed and manufactured according to Figure B.5 Migration Test Cell C in Appendix B of GB 5009.156‑2016 and Figure C.8 Migration Test Cell F in Appendix C of EN1186‑1:2002, ensuring consistency of migration test results. • Made of high‑quality stainless steel without trace substance precipitation. • Supports both single‑sided and double‑sided detection to reduce model‑selection trouble. Double‑sided contact is suitable for food‑contact materials such as instant‑noodle outer packaging and seasoning sachets. • Adopts high‑temperature resistant, corrosion‑resistant and self‑cleaning sealing ring to achieve excellent sealing performance, preventing leakage and volatilization of various simulants during testing. • Unique sealing structure ensures areas outside the test surface do not come into contact with food simulants, guaranteeing valid test area. • Suitable for migration test pre‑treatment of a wider range of materials. Application Fields It applies to migration test pre‑treatment of food‑contact materials and products exposed to food simulants including water, ethanol, acetic acid, vegetable oil, n‑hexane, n‑heptane and isooctane. Conclusion MC‑C Migration Test Cell is a standard‑compliant auxiliary device for food‑contact material safety testing. Supporting both single‑sided and double‑sided contact modes, it fits diverse packaging samples including instant‑noodle packages and seasoning bags. High‑quality stainless steel avoids trace substance release, and reliable sealing prevents simulant leakage and volatilization. It delivers repeatable migration pre‑treatment results for lab QC, third‑party testing institutes and packaging manufacturers. It is essential hardware for food‑contact material compliance assessment both for domestic market and European export business. Get Quotation for This Unit GBPI Packaging Test Equipment ManufacturerAddress: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, Guangzhou, Guangdong, ChinaTel: +86 15820231129 | Official Website: www.gbpitester.com

MC‑C1 Migration Test Cell: Professional Pre‑Treatment Solution for Food‑Contact Material Migration Test GBPI MC‑C1 Migration Test Cell for Food‑Contact Material Migration Pre‑Treatment Address: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, GuangzhouTel: +86 15820231129 | Official Website: www.gbpitester.com Product Introduction MC‑C1 Migration Test Cell is suitable for pre‑treatment of migration tests for food‑contact materials and products. It is applicable to all non‑volatile food simulants specified in GB 31604.1‑2015, EN1186‑1, EN13130‑1:2004 and other relevant standards. It provides standardized test conditions to support safety assessment for food‑contact flat specimens, widely adopted by third‑party laboratories, food packaging manufacturers and research institutes. Executive Standards To ensure test repeatability and global recognition, MC‑C1 Migration Test Cell conforms to both Chinese national standards and European normative requirements: GB 5009.156‑2016, GB 31604.1‑2015, GB/T 23296.1‑2009, EN1186‑1:2002, EN 13130‑1:2004. It satisfies migration pre‑treatment requirements for domestic inspection and EU export certification. Core Technical Parameters Contact Mode Single‑sided or Double‑sided contact Single‑sided Contact Area(Diameter) 100 cm² (Φ112.8 mm) Double‑sided Contact Area 200 cm² Volume 200 mL Operating Temperature 5℃～180℃ Overall Dimensions 175mm(L) × 140mm(W) × 63mm(H) Net Weight 2.3 kg Product Features • Complies with relevant standards, fully designed and manufactured according to Migration Cell C in Appendix C of EN1186‑1:2002 and Migration Test Cell C in Appendix D of EN13130‑1:2004, ensuring consistency of migration test results. • Supports both single‑sided and double‑sided detection to reduce model‑selection trouble. Double‑sided contact is suitable for food‑contact materials such as instant‑noodle outer packaging and seasoning sachets. • Adopts high‑temperature resistant, corrosion‑resistant and self‑cleaning sealing ring to achieve excellent sealing performance, preventing leakage and volatilization of various simulants during testing. • Unique sealing structure ensures areas outside the test surface do not come into contact with food simulants, guaranteeing valid test area. • Suitable for migration test pre‑treatment of a wider range of materials. Application Fields It applies to migration test pre‑treatment of sheet‑shaped food‑contact materials and products for single‑sided exposure to food simulants including water, ethanol, acetic acid, vegetable oil, n‑hexane, n‑heptane and isooctane. Conclusion MC‑C1 Migration Test Cell is a standard‑compliant auxiliary device for food‑contact material safety testing. Supporting both single‑sided and double‑sided contact modes, it fits diverse packaging samples including instant‑noodle packages and seasoning bags. Reliable sealing avoids simulant leakage and volatilization. It delivers repeatable migration pre‑treatment results for lab QC, third‑party testing institutes and packaging manufacturers. It is essential hardware for food‑contact material compliance assessment both for domestic market and European export business. Get Quotation for This Unit GBPI Packaging Test Equipment ManufacturerAddress: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, Guangzhou, Guangdong, ChinaTel: +86 15820231129 | Official Website: www.gbpitester.com

MC‑B Migration Test Cell: Professional Pre‑Treatment Solution for Food‑Contact Material Migration Test GBPI MC‑B Migration Test Cell for Food‑Contact Material Migration Pre‑Treatment Address: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, GuangzhouTel: +86 15820231129 | Official Website: www.gbpitester.com Product Introduction MC‑B Migration Test Cell is applied to the pre‑treatment of migration tests for food‑contact materials and products. It meets the requirements of GB 5009.156‑2016 and is suitable for all non‑volatile food simulants specified in GB 31604.1‑2015, EN1186‑1 and other relevant standards. It provides standardized test conditions to support safety assessment for food‑contact films, sheets and flat‑shape specimens, widely adopted by third‑party laboratories, food packaging manufacturers and research institutes. Executive Standards To ensure test repeatability and global recognition, MC‑B Migration Test Cell conforms to both Chinese national standards and European normative requirements: GB 5009.156‑2016, GB 31604.1‑2015, GB/T 23296.1‑2009, EN 1186‑1:2002, EN 13130‑1:2004. It satisfies migration pre‑treatment requirements for domestic inspection and EU export certification. Core Technical Parameters Contact Type Single‑sided contact Contact Area 196 cm² Diameter Φ158 mm Volume 390 mL Operating Temperature 5℃ ~ 180℃ Overall Dimensions 235 mm(L) × 225 mm(B) × 135 mm(H) Net Weight 8.2 kg Product Features • Manufactured strictly in accordance with Figure B.4 of Appendix B in GB 5009.156‑2016 for Migration Test Cell B and Figure C.3 Migration Test Cell A from Appendix C of EN1186‑1, ensuring high consistency of migration test results among different laboratories. • Adopts high‑grade stainless steel material, no trace substance precipitation occurs during testing, avoiding interference to migration analysis data. • Thickened lead‑screw central compression sealing structure delivers reliable single‑sided sealing and prevents liquid permeation. • Large single‑sided contact area and volume improve the efficiency of sample pre‑treatment. • Special sealing construction isolates non‑test areas of samples from food simulants, securing valid and accurate contact test area. Application Fields It applies to migration test pre‑treatment for food‑contact materials and products in forms of films, plates and sample sheets. It supports migration pre‑treatment with non‑volatile food simulants including water, acid‑alkali solutions and vegetable oil for food‑contact articles, satisfying routine inspection, new‑material R&D and export compliance verification for food packaging industry. Conclusion MC‑B Migration Test Cell is a standard‑compliant auxiliary device for food‑contact material safety testing. Built according to Chinese national standard and European standard drawings, it features large contact area and high pre‑treatment efficiency. It delivers repeatable migration pre‑treatment results for lab QC, third‑party testing institutes and packaging manufacturers. It is essential hardware for food‑contact material compliance assessment both for domestic market and European export business. Get Quotation for This Unit GBPI Packaging Test Equipment ManufacturerAddress: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, Guangzhou, Guangdong, ChinaTel: +86 15820231129 | Official Website: www.gbpitester.com

MC‑A Migration Test Cell: Professional Pre‑Treatment Solution for Food‑Contact Material Migration Test GBPI MC‑A Migration Test Cell for Food‑Contact Material Migration Pre‑Treatment Address: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, GuangzhouTel: +86 15820231129 | Official Website: www.gbpitester.com Product Introduction MC‑A Migration Test Cell is designed for the pre‑treatment of migration tests for food‑contact materials and products. It complies with GB 5009.156‑2016 requirements and is applicable for food simulants defined in GB 31604.1‑2015, EN1186‑1 and other relevant standards. It provides standardized test conditions to support safety assessment for food‑contact films, sheets and flat‑shape specimens, widely adopted by third‑party laboratories, food packaging manufacturers and research institutes. Executive Standards To ensure test repeatability and global recognition, MC‑A Migration Test Cell conforms to both Chinese national standards and European normative requirements: GB 5009.156‑2016, GB 31604.1‑2015, GB/T 23296.1‑2009, EN 1186‑1:2002, EN 13130‑1:2004. It satisfies migration pre‑treatment requirements for domestic inspection and EU export certification. Core Technical Parameters Contact Type Single‑sided contact Contact Area 196 cm² Contact Diameter Φ158 mm Volume 390 mL Operating Temperature 5℃ ~ 180℃ Thermometer Measuring Range ‑20℃ ~ 300℃ Net Weight 6.9 kg Product Features • Manufactured strictly in accordance with Figure B.3 of Appendix B in GB 5009.156‑2016 for Migration Test Cell A, ensuring high consistency of migration test results among different laboratories. • Adopts high‑grade stainless steel material, no trace substance precipitation occurs during testing, avoiding interference to migration analysis data. • Thickened lead‑screw central compression sealing structure delivers reliable single‑sided sealing and prevents liquid permeation. • Special sealing construction isolates non‑test areas of samples from food simulants, securing valid and accurate contact test area. • Equipped with external temperature‑measuring unit, which can precisely capture real‑time temperature of food simulants in the whole pre‑treatment procedure. Application Fields It applies to migration test pre‑treatment for food‑contact materials and products in forms of films, plates and sample sheets. It supports migration pre‑treatment with non‑volatile food simulants including water, acid‑alkali solutions and vegetable oil for food‑contact articles, satisfying routine inspection, new‑material R&D and export compliance verification for food packaging industry. Conclusion MC‑A Migration Test Cell is a standard‑compliant auxiliary device for food‑contact material safety testing. With precise single‑sided contact structure, anti‑interference material and external real‑time temperature monitoring, it delivers repeatable migration pre‑treatment results for lab QC, third‑party testing institutes and packaging manufacturers. It is essential hardware for food‑contact material compliance assessment both for domestic market and European export business. Get Quotation for This Unit GBPI Packaging Test Equipment ManufacturerAddress: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, Guangzhou, Guangdong, ChinaTel: +86 15820231129 | Official Website: www.gbpitester.com

Based on the accumulation of research and development and manufacturing technologies of mass spectrometers, Guangzhou Biaoji Packaging Equipment Co., Ltd. has been tackling key problems for six years，through painstaking efforts, ingenuity and continuous upgrading and iteration, it solemnly launched the second generation triple quadrupole GBLC-TQ 1000. The product integrates a number of core patented technologies such as high-efficiency anti-fouling ion source, multi-stage ion guidance technology, high-precision mass analyzer, linear acceleration collision cell, and high-voltage radio frequency power supply. Compare with that first generation product, the invention has the advantages of high transmission efficiency, better sensitivity, faster scanning speed, bet stability and overall performance improvement, and is suitable for sample detection and scientific research in various fields such as public security, food, clinic, medicine, environmental protection and the like. GBLC-TQ 1000 will be your laboratory's indispensable assistant, help you easily cope with any challenge, achieve unimaginable achievements.

Full-Automatic Overall Migration Tester AUTO ZF900 has an integrated system design of water bath evaporation, heating and drying, drying and cooling, and constant temperature weighing. It is suitable for testing the total migration (non-volatile matter, evaporation residue) and other items in the fields of purified water, pharmaceutical packaging materials, food packaging, cigarette tipping paper and chemical reagents. It can also be applied to the water content, loss on drying and other items of solid samples, and the total dissolved solids content test in water quality testing.

Application It is used for accurate color analysis and transmission; it is used for precision color measurement and quality control in plastic electronics, paint ink, textile and garment printing, printing, ceramics, etc.; it can be used for fluorescence sample measurement.

  ZF3600 Full-automatic Total Migration Tester is applied to determinate the dissolution amount of packaging materials in different simulant soaking solutions.

  AUTO ZF3600 Total Migration & Non-Volatile Residue Tester Full-automatic Evaporation Residue & Loss on Drying Analyzer for Pharmaceutical, Food Contact, Chemical & Water Quality Testing Need technical datasheet, quotation or application support? Get free consultation from GBPI's testing instrument experts. Click for Free Consultation Introduction The AUTO ZF3600 Total Migration & Non-Volatile Residue Tester adopts an integrated system design of water bath evaporation, heating drying, cooling and constant-weight weighing. The whole test process runs fully automatically without manual operation. It is suitable for total migration (non-volatile residue, evaporation residue) tests in purified water, pharmaceutical packaging materials, food contact materials, cigarette tipping paper, chemical reagents and other fields. It can also be used for moisture content and loss on drying of solid samples, as well as total dissolved solids testing in water quality inspection. Test Principle Transfer the test solution into the solvent dish of the automatic feeding system. The empty dish is heated, cooled and weighed according to the set temperature. Repeat the steps until the constant weight is reached. The solution is evaporated to dryness in a water bath below the boiling point of the immersion liquid. The chamber is heated to 105℃ for drying and then cooled. After the evaporating dish is cooled, the balance judges the constant weight, and the experiment ends once the constant weight requirement of the test item is satisfied. Schematic Diagram of Principle Compliance Standards Purified Water: Purified Water in Chinese Pharmacopoeia Volume II, EP9.0 WATER, PURIFIED Pharmaceutical Packaging: Non-volatile residue item in extractables test of National Pharmaceutical Packaging Material Standard Food Contact Materials: GB 31604.8-2021, EN 1186-3:2002 method A, Standards and Specifications for Utensils, Containers and Packages of Korea Ministry of Health and Welfare chapter IV 2-8 Cigarette Tipping Paper: YQ/T 59-2015 Chemical Reagents: GB/T 9740-2008, ISO 759 Water Quality: GB 8538-2016, DZT0064.9-2021, GB/T 14415-2007, GB/T 5750.4-2006 Solid Samples: Extractables and Loss on Drying in Chinese Pharmacopoeia Volume IV, USP40-NF35<921> WATER DETERMINATION Specifications Item Technical Parameters Measuring Range 0 g ~ 80 g Balance Resolution 0.1 mg Balance Weighing Range 0 g ~ 220 g Constant Weight Tolerance 0.3 mg, adjustable Water Bath Temperature Range Ambient ~ 100℃ Oven Temperature Range Ambient ~ 125℃ Temperature Control Accuracy ±0.5℃ Number of Sample Positions 36 Evaporating Dish Volume 100 mL Gas Port Size Φ8 mm Overall Dimension 1200 mm(L) × 850 mm(W) × 1335 mm(H) Power Supply 220V,50Hz Rated Power 7000 W Operation System Windows 10 Pro 64-bit Features Dual-temperature Integrated Control System, Upgraded Automation Integrated workflow of water bath evaporation, drying, cooling and constant weight for automatic, efficient and precise testing. Adopts automatic feeding mechanism controlled by pneumatic valve with residual volume less than 0.1 mL, no waiting or manual attendance required. Built-in water bath with liquid level sensor for automatic water level detection, water filling, draining and temperature control. High-precision Imported Balances with Isolation Protection Equipped with 3 high-precision imported balances, constant weight of 0.3 mg can be achieved after two drying cycles. Balances are installed in a stable shield with water-circulation interlayer to keep stable temperature and humidity during weighing. High Throughput & Wide Compatibility 36 independent test stations with separate data output to meet high-throughput testing needs. Compatible with purified water, n-hexane, ethanol, acetic acid, chloroform and other organic solvents. Cooling & Recovery System for Efficient Solvent Recycling Built-in circulating water cooling pump maintains low chamber temperature. Eco-friendly, cooling down to room temperature within 30 min. Equipped with solvent recovery bottle, solvent recovery rate over 90%. Intelligent Operating System, Global Compliance Real-time display of weighing data, temperature and humidity curves; data is automatically saved for query. Designed in accordance with GMP annex for computerized systems, flexible parameter setting for different standards. Audit trail function for full data traceability, user permission management available. Supports multiple data output formats, electronic signature and online report approval. Laboratory Intelligent IoT Platform The instrument can connect to the IoT platform for network digital management. Authorized users can remotely log into the IoT platform, access the instrument software interface, manage test data and perform remote fault diagnosis. Application Image Application Field Description Purified Water Suitable for testing the non-volatile content of purified water and sterile water for injection in the pharmaceutical industry. Pharmaceutical Packaging Materials Suitable for the test of non-volatile matter items in the dissolution test of plastic and rubber pharmaceutical packaging materials. Food Packaging Materials Suitable for various food utensils, containers and food packaging films, cans or other various food tools, pipes and other products made of polyethylene, polystyrene, polypropylene, perchlorinated vinyl resin as raw materials in different food simulants. Determination of total migration after immersion. Cigarette Pack Materials Suitable for total migration test of cigarette tipping paper soaking solution. Chemical Reagent Suitable for the evaporation residue test of chemical reagents, such as ethanol, acetic acid, n-hexane, chloroform and other organic solvents whose boiling point is lower than 100℃. Domestic Water and Drinking Water, Industrial Water, Sewage Suitable for the total dissolved solids test of drinking water, drinking natural mineral water, groundwater, drinking water, swimming pool water, urban sewage, industrial boiler water, etc. Solid Samples, Pharmaceutical Particles Suitable for loss on drying, dry content or moisture testing of solid samples, such as hollow capsules, noncrystalline cellulose and other pharmaceuticals or other solid particles. Ready to upgrade your total migration and non-volatile residue testing workflow? Contact GBPI today for datasheet, quotation and professional testing solution. Click for Free Consultation

  AUTO ZF1800G Total Migration & Non-Volatile Residue Tester Full-automatic Evaporation Residue & Loss on Drying Analyzer for Pharmaceutical, Food Contact, Chemical & Water Quality Testing Need technical datasheet, quotation or application support? Get free consultation from GBPI's testing instrument experts. Click for Free Consultation Introduction The AUTO ZF1800G Total Migration & Non-Volatile Residue Tester adopts an integrated system design of water bath evaporation, heating drying, cooling and constant-weight weighing. The whole test process runs fully automatically without manual operation. It is suitable for total migration (non-volatile residue, evaporation residue) tests in purified water, pharmaceutical packaging materials, food contact materials, cigarette tipping paper, chemical reagents and other fields. It can also be used for moisture content and loss on drying of solid samples, as well as total dissolved solids testing in water quality inspection. Test Principle Transfer the test solution into the solvent dish of the automatic feeding system. The empty dish is heated, cooled and weighed according to the set temperature. Repeat the steps until the constant weight is reached. The solution is evaporated to dryness in a water bath below the boiling point of the immersion liquid. The chamber is heated to 105℃ for drying and then cooled. After the evaporating dish is cooled, the balance judges the constant weight, and the experiment ends once the constant weight requirement of the test item is satisfied. Compliance Standards Purified Water: Purified Water in Chinese Pharmacopoeia Volume II, EP9.0 WATER, PURIFIED Pharmaceutical Packaging: Non-volatile residue item in extractables test of National Pharmaceutical Packaging Material Standard Food Contact Materials: GB 31604.8-2016, EN 1186-3:2002 method A, Standards and Specifications for Utensils, Containers and Packages of Korea Ministry of Health and Welfare chapter IV 2-8 Cigarette Tipping Paper: YQ/T 59-2015 Baijiu: GB/T 10345-2022 Method of Analysis for Baijiu Chemical Reagents: GB/T 9740-2008, ISO 759 Water Quality: GB 8538-2016, DZT0064.9-2021, GB/T 14415-2007, GB/T 5750.4-2006 Solid Samples: Extractables and Loss on Drying in Chinese Pharmacopoeia Volume IV, USP40-NF35<921> WATER DETERMINATION Specifications Item Technical Parameters Measuring Range 0 g ~ 80 g Balance Resolution 0.1 mg Balance Weighing Range 0 g ~ 220 g Constant Weight Tolerance 0.3 mg, adjustable Water Bath Temperature Range Ambient ~ 100℃ Oven Temperature Range Ambient ~ 125℃ Temperature Control Accuracy ±0.5℃ Number of Sample Positions 18 Evaporating Dish Volume 200 mL Gas Port Size Φ8 mm Overall Dimension 1200 mm(L) × 850 mm(W) × 1335 mm(H) Power Supply 220V,50Hz Rated Power 7000 W Operation System Windows 10 Pro 64-bit Features Dual-temperature Integrated Control System, Upgraded Automation Integrated workflow of water bath evaporation, drying, cooling and constant weight for automatic, efficient and precise testing. Adopts automatic feeding mechanism controlled by pneumatic valve with residual volume less than 0.1 mL, no waiting or manual attendance required. Built-in water bath with liquid level sensor for automatic water level detection, water filling, draining and temperature control. High-precision Imported Balances with Isolation Protection Equipped with 2 high-precision imported balances, constant weight of 0.3 mg can be achieved after two drying cycles. Balances are installed in a stable shield with water-circulation interlayer to keep stable temperature and humidity during weighing. High Throughput & Wide Compatibility 18 independent test stations with separate data output to meet high-throughput testing needs. Compatible with purified water, n-hexane, ethanol, acetic acid, chloroform and other organic solvents. Cooling & Recovery System for Efficient Solvent Recycling Built-in circulating water cooling pump maintains low chamber temperature. Eco-friendly, cooling down to room temperature within 30 min. Equipped with solvent recovery bottle, solvent recovery rate over 90%. Intelligent Operating System, Global Compliance Real-time display of weighing data, temperature and humidity curves; data is automatically saved for query. Designed in accordance with GMP annex for computerized systems, flexible parameter setting for different standards. Audit trail function for full data traceability, user permission management available. Supports multiple data output formats, electronic signature and online report approval. Laboratory Intelligent IoT Platform The instrument can connect to the IoT platform for network digital management. Authorized users can remotely log into the IoT platform, access the instrument software interface, manage test data and perform remote fault diagnosis. Application Image Application Field Description Purified Water Suitable for testing the non-volatile content of purified water and sterile water for injection in the pharmaceutical industry. Pharmaceutical Packaging Materials Suitable for the test of non-volatile matter items in the dissolution test of plastic and rubber pharmaceutical packaging materials. Food Packaging Materials Suitable for various food utensils, containers and food packaging films, cans or other various food tools, pipes and other products made of polyethylene, polystyrene, polypropylene, perchlorinated vinyl resin as raw materials in different food simulants. Determination of total migration after immersion. Cigarette Pack Materials Suitable for total migration test of cigarette tipping paper soaking solution. Chemical Reagent Suitable for the evaporation residue test of chemical reagents, such as ethanol, acetic acid, n-hexane, chloroform and other organic solvents whose boiling point is lower than 100℃. Domestic Water and Drinking Water, Industrial Water, Sewage Suitable for the total dissolved solids test of drinking water, drinking natural mineral water, groundwater, drinking water, swimming pool water, urban sewage, industrial boiler water, etc. Solid Samples, Pharmaceutical Particles Suitable for loss on drying, dry content or moisture testing of solid samples, such as hollow capsules, noncrystalline cellulose and other pharmaceuticals or other solid particles. Ready to upgrade your total migration and non-volatile residue testing workflow? Contact GBPI today for datasheet, quotation and professional testing solution. Click for Free Consultation