full-automatic migration tester is specialized for testing dissolved non-volatile-matter of materials after soaked in specific solution.

MC‑D Migration Test Cell: Professional Pre‑Treatment Solution for Food‑Contact Material Migration Test GBPI MC‑D Migration Test Cell for Food‑Contact Material Migration Pre‑Treatment Address: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, GuangzhouTel: +86 15820231129 | Official Website: www.gbpitester.com Product Introduction MC‑D Migration Test Cell is suitable for pre‑treatment of migration tests for food‑contact materials and products. It meets the requirements of GB 5009.156‑2016 and applies to all non‑volatile food simulants specified in GB/T 23296.1‑2009, GB 31604.1‑2015 and other relevant standards. It provides standardized test conditions to support safety assessment for food‑contact specimens, widely adopted by third‑party laboratories, food packaging manufacturers and research institutes. Executive Standards To ensure test repeatability and global recognition, MC‑D Migration Test Cell conforms to both Chinese national standards and European normative requirements: GB/T 23296.1‑2009, EN13130‑1:2004, GB 5009.156‑2016, GB 31604.1‑2015, EN1186‑1:2002. It satisfies migration pre‑treatment requirements for domestic inspection and EU export certification. Core Technical Parameters Contact Mode Single‑sided contact Contact Area 99.17 cm² Contact Surface Diameter Φ112.4 mm Volume 300 mL Operating Temperature 5℃ ~ 120℃ Product Features • Designed and manufactured with reference to Type‑D cell in Appendix C of EN1186‑1:2002, Type‑D cell in Appendix D of GB/T 23296.1‑2009 and Type‑D cell in Appendix D of EN13130‑1:2004, ensuring consistency of migration test results. • This migration cell supports both migration‑cell method and total‑immersion method to meet diverse pre‑treatment requirements. • Constructed of premium borosilicate glass featuring high hardness, high light transmittance and excellent chemical stability. It is heat‑resistant with low matrix content and will not interfere with the determination of overall migration and specific migration values. • Adjustable stainless‑steel latches enable simple operation and reliable sealing. It prevents burst under high‑temperature conditions with various food simulants, guaranteeing test safety and stable migration results. • For non‑reflux immersion, the opening can be sealed and fixed directly with glass plug to carry out total‑immersion tests at ambient and high temperatures. • For reflux immersion, a condensation reflux tube can be directly connected to the ground‑glass joint for migration testing. Application Fields It applies to migration test pre‑treatment of food‑contact materials and products exposed to food simulants including water, acetic acid and ethanol. Conclusion MC‑D Migration Test Cell is a standard‑compliant auxiliary device for food‑contact material safety testing. Made of high‑performance borosilicate glass, it supports both migration‑cell and total‑immersion approaches, compatible with non‑reflux and reflux immersion workflows. With safe anti‑burst performance under high‑temperature testing, it delivers repeatable migration pre‑treatment results for lab QC, third‑party testing institutes and packaging manufacturers. It is essential hardware for food‑contact material compliance assessment both for domestic market and European export business. Get Quotation for This Unit GBPI Packaging Test Equipment ManufacturerAddress: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, Guangzhou, Guangdong, ChinaTel: +86 15820231129 | Official Website: www.gbpitester.com

MC‑C1 Migration Test Cell: Professional Pre‑Treatment Solution for Food‑Contact Material Migration Test GBPI MC‑C1 Migration Test Cell for Food‑Contact Material Migration Pre‑Treatment Address: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, GuangzhouTel: +86 15820231129 | Official Website: www.gbpitester.com Product Introduction MC‑C1 Migration Test Cell is suitable for pre‑treatment of migration tests for food‑contact materials and products. It is applicable to all non‑volatile food simulants specified in GB 31604.1‑2015, EN1186‑1, EN13130‑1:2004 and other relevant standards. It provides standardized test conditions to support safety assessment for food‑contact flat specimens, widely adopted by third‑party laboratories, food packaging manufacturers and research institutes. Executive Standards To ensure test repeatability and global recognition, MC‑C1 Migration Test Cell conforms to both Chinese national standards and European normative requirements: GB 5009.156‑2016, GB 31604.1‑2015, GB/T 23296.1‑2009, EN1186‑1:2002, EN 13130‑1:2004. It satisfies migration pre‑treatment requirements for domestic inspection and EU export certification. Core Technical Parameters Contact Mode Single‑sided or Double‑sided contact Single‑sided Contact Area(Diameter) 100 cm² (Φ112.8 mm) Double‑sided Contact Area 200 cm² Volume 200 mL Operating Temperature 5℃～180℃ Overall Dimensions 175mm(L) × 140mm(W) × 63mm(H) Net Weight 2.3 kg Product Features • Complies with relevant standards, fully designed and manufactured according to Migration Cell C in Appendix C of EN1186‑1:2002 and Migration Test Cell C in Appendix D of EN13130‑1:2004, ensuring consistency of migration test results. • Supports both single‑sided and double‑sided detection to reduce model‑selection trouble. Double‑sided contact is suitable for food‑contact materials such as instant‑noodle outer packaging and seasoning sachets. • Adopts high‑temperature resistant, corrosion‑resistant and self‑cleaning sealing ring to achieve excellent sealing performance, preventing leakage and volatilization of various simulants during testing. • Unique sealing structure ensures areas outside the test surface do not come into contact with food simulants, guaranteeing valid test area. • Suitable for migration test pre‑treatment of a wider range of materials. Application Fields It applies to migration test pre‑treatment of sheet‑shaped food‑contact materials and products for single‑sided exposure to food simulants including water, ethanol, acetic acid, vegetable oil, n‑hexane, n‑heptane and isooctane. Conclusion MC‑C1 Migration Test Cell is a standard‑compliant auxiliary device for food‑contact material safety testing. Supporting both single‑sided and double‑sided contact modes, it fits diverse packaging samples including instant‑noodle packages and seasoning bags. Reliable sealing avoids simulant leakage and volatilization. It delivers repeatable migration pre‑treatment results for lab QC, third‑party testing institutes and packaging manufacturers. It is essential hardware for food‑contact material compliance assessment both for domestic market and European export business. Get Quotation for This Unit GBPI Packaging Test Equipment ManufacturerAddress: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, Guangzhou, Guangdong, ChinaTel: +86 15820231129 | Official Website: www.gbpitester.com

  ZF3600 Full-automatic Total Migration Tester is applied to determinate the dissolution amount of packaging materials in different simulant soaking solutions.  

Full-Automatic Overall Migration Tester AUTO ZF900 has an integrated system design of water bath evaporation, heating and drying, drying and cooling, and constant temperature weighing. It is suitable for testing the total migration (non-volatile matter, evaporation residue) and other items in the fields of purified water, pharmaceutical packaging materials, food packaging, cigarette tipping paper and chemical reagents. It can also be applied to the water content, loss on drying and other items of solid samples, and the total dissolved solids content test in water quality testing.

MC‑A Migration Test Cell: Professional Pre‑Treatment Solution for Food‑Contact Material Migration Test GBPI MC‑A Migration Test Cell for Food‑Contact Material Migration Pre‑Treatment Address: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, GuangzhouTel: +86 15820231129 | Official Website: www.gbpitester.com Product Introduction MC‑A Migration Test Cell is designed for the pre‑treatment of migration tests for food‑contact materials and products. It complies with GB 5009.156‑2016 requirements and is applicable for food simulants defined in GB 31604.1‑2015, EN1186‑1 and other relevant standards. It provides standardized test conditions to support safety assessment for food‑contact films, sheets and flat‑shape specimens, widely adopted by third‑party laboratories, food packaging manufacturers and research institutes. Executive Standards To ensure test repeatability and global recognition, MC‑A Migration Test Cell conforms to both Chinese national standards and European normative requirements: GB 5009.156‑2016, GB 31604.1‑2015, GB/T 23296.1‑2009, EN 1186‑1:2002, EN 13130‑1:2004. It satisfies migration pre‑treatment requirements for domestic inspection and EU export certification. Core Technical Parameters Contact Type Single‑sided contact Contact Area 196 cm² Contact Diameter Φ158 mm Volume 390 mL Operating Temperature 5℃ ~ 180℃ Thermometer Measuring Range ‑20℃ ~ 300℃ Net Weight 6.9 kg Product Features • Manufactured strictly in accordance with Figure B.3 of Appendix B in GB 5009.156‑2016 for Migration Test Cell A, ensuring high consistency of migration test results among different laboratories. • Adopts high‑grade stainless steel material, no trace substance precipitation occurs during testing, avoiding interference to migration analysis data. • Thickened lead‑screw central compression sealing structure delivers reliable single‑sided sealing and prevents liquid permeation. • Special sealing construction isolates non‑test areas of samples from food simulants, securing valid and accurate contact test area. • Equipped with external temperature‑measuring unit, which can precisely capture real‑time temperature of food simulants in the whole pre‑treatment procedure. Application Fields It applies to migration test pre‑treatment for food‑contact materials and products in forms of films, plates and sample sheets. It supports migration pre‑treatment with non‑volatile food simulants including water, acid‑alkali solutions and vegetable oil for food‑contact articles, satisfying routine inspection, new‑material R&D and export compliance verification for food packaging industry. Conclusion MC‑A Migration Test Cell is a standard‑compliant auxiliary device for food‑contact material safety testing. With precise single‑sided contact structure, anti‑interference material and external real‑time temperature monitoring, it delivers repeatable migration pre‑treatment results for lab QC, third‑party testing institutes and packaging manufacturers. It is essential hardware for food‑contact material compliance assessment both for domestic market and European export business. Get Quotation for This Unit GBPI Packaging Test Equipment ManufacturerAddress: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, Guangzhou, Guangdong, ChinaTel: +86 15820231129 | Official Website: www.gbpitester.com

Full-automatic Total Migration Tester AUTO ZF1800G has an integrated system design of water bath evaporation, heating, drying, cooling, and constant temperature weighing. The testing process is fully automated without manual operation. It is suitable for testing the overrall migration (non-volatile matter, evaporation residue) and other items in the fields of purified water, pharmaceutical packaging materials, food packaging, cigarette tipping paper and chemical reagents. It can also be applied to the water content, loss on drying and other items of solid samples, and the total dissolved solid content test in water quality testing.

MC‑B Migration Test Cell: Professional Pre‑Treatment Solution for Food‑Contact Material Migration Test GBPI MC‑B Migration Test Cell for Food‑Contact Material Migration Pre‑Treatment Address: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, GuangzhouTel: +86 15820231129 | Official Website: www.gbpitester.com Product Introduction MC‑B Migration Test Cell is applied to the pre‑treatment of migration tests for food‑contact materials and products. It meets the requirements of GB 5009.156‑2016 and is suitable for all non‑volatile food simulants specified in GB 31604.1‑2015, EN1186‑1 and other relevant standards. It provides standardized test conditions to support safety assessment for food‑contact films, sheets and flat‑shape specimens, widely adopted by third‑party laboratories, food packaging manufacturers and research institutes. Executive Standards To ensure test repeatability and global recognition, MC‑B Migration Test Cell conforms to both Chinese national standards and European normative requirements: GB 5009.156‑2016, GB 31604.1‑2015, GB/T 23296.1‑2009, EN 1186‑1:2002, EN 13130‑1:2004. It satisfies migration pre‑treatment requirements for domestic inspection and EU export certification. Core Technical Parameters Contact Type Single‑sided contact Contact Area 196 cm² Diameter Φ158 mm Volume 390 mL Operating Temperature 5℃ ~ 180℃ Overall Dimensions 235 mm(L) × 225 mm(B) × 135 mm(H) Net Weight 8.2 kg Product Features • Manufactured strictly in accordance with Figure B.4 of Appendix B in GB 5009.156‑2016 for Migration Test Cell B and Figure C.3 Migration Test Cell A from Appendix C of EN1186‑1, ensuring high consistency of migration test results among different laboratories. • Adopts high‑grade stainless steel material, no trace substance precipitation occurs during testing, avoiding interference to migration analysis data. • Thickened lead‑screw central compression sealing structure delivers reliable single‑sided sealing and prevents liquid permeation. • Large single‑sided contact area and volume improve the efficiency of sample pre‑treatment. • Special sealing construction isolates non‑test areas of samples from food simulants, securing valid and accurate contact test area. Application Fields It applies to migration test pre‑treatment for food‑contact materials and products in forms of films, plates and sample sheets. It supports migration pre‑treatment with non‑volatile food simulants including water, acid‑alkali solutions and vegetable oil for food‑contact articles, satisfying routine inspection, new‑material R&D and export compliance verification for food packaging industry. Conclusion MC‑B Migration Test Cell is a standard‑compliant auxiliary device for food‑contact material safety testing. Built according to Chinese national standard and European standard drawings, it features large contact area and high pre‑treatment efficiency. It delivers repeatable migration pre‑treatment results for lab QC, third‑party testing institutes and packaging manufacturers. It is essential hardware for food‑contact material compliance assessment both for domestic market and European export business. Get Quotation for This Unit GBPI Packaging Test Equipment ManufacturerAddress: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, Guangzhou, Guangdong, ChinaTel: +86 15820231129 | Official Website: www.gbpitester.com

Introduction The N560 2.0 Gas Transmission Rate Tester is a high-precision laboratory testing equipment integrating machinery, electronics and software. It is suitable for the gas barrier property test of plastic films, composite films, sheets, metal foils and other sheet materials, as well as the gas transmission rate test of packaging containers such as bottles, bags, cans and boxes made of plastics, rubber, paper and other multi-type materials.  

The thickness of the film material, an important characteristic of the packaging material, varies and is critical for other properties such as permeability, tensile strength, impact resistance, etc.

Introduction This product is designed and manufactured based on the coulometric sensor method and conforms to GB/T 19789、ASTM D3985.This instrument can be used to measure the oxygen transmission rate of barrier materials with high and medium barrier properties with high accuracy and high efficiency.Y310Lis applicable to the determination of oxygen permeability of plastic films, sheeting, paper, and other packaging materials used in food, pharmaceutical, medical apparatus, consumer products, photovoltaic and electronic industries, etc.