The HP-D1 Automatic Torque Tester HP-D1 is innovated to test cap torque for detecting sealing performance of packaging containers, such as plastic bottles, liquid boxes, cans, etc.

Oxygen transmission rate (OTR) is the measurement of the amount of oxygen gas that passes through a substance over a given period. It is mostly carried out on non-porous materials, where the mode of transport is diffusion, but there are a growing number of applications where the transmission rate also depends on flow through apertures of some description.

This product is based on the testing principle of the Coulometric Sensor Method testing Oxygen and is designed and manufactured with reference to ASTM D3985, GB/T 19789 and other standards. Adopting high-precision imported oxygen sensor, high test accuracy, it is suitable for oxygen transmission performance testing of films, sheets, paper, packaging and related materials in the fields of food, medicine, medical equipment, daily chemicals, photovoltaic electronics, etc., and provides a wide range and high-efficiency oxygen transmission rate detection for high, medium and low oxygen barrier materials.

The torque tester is professionally suitable for testing the torque value of the caps of packaging products such as bottles, beverage bottles, mineral water bottles, and milk bottles. It is an ideal configuration instrument for offline or online testing of production units in the packaging industry.

  AUTO ZF3600 Total Migration & Non-Volatile Residue Tester Full-automatic Evaporation Residue & Loss on Drying Analyzer for Pharmaceutical, Food Contact, Chemical & Water Quality Testing Need technical datasheet, quotation or application support? Get free consultation from GBPI's testing instrument experts. Click for Free Consultation Introduction The AUTO ZF3600 Total Migration & Non-Volatile Residue Tester adopts an integrated system design of water bath evaporation, heating drying, cooling and constant-weight weighing. The whole test process runs fully automatically without manual operation. It is suitable for total migration (non-volatile residue, evaporation residue) tests in purified water, pharmaceutical packaging materials, food contact materials, cigarette tipping paper, chemical reagents and other fields. It can also be used for moisture content and loss on drying of solid samples, as well as total dissolved solids testing in water quality inspection. Test Principle Transfer the test solution into the solvent dish of the automatic feeding system. The empty dish is heated, cooled and weighed according to the set temperature. Repeat the steps until the constant weight is reached. The solution is evaporated to dryness in a water bath below the boiling point of the immersion liquid. The chamber is heated to 105℃ for drying and then cooled. After the evaporating dish is cooled, the balance judges the constant weight, and the experiment ends once the constant weight requirement of the test item is satisfied. Schematic Diagram of Principle Compliance Standards Purified Water: Purified Water in Chinese Pharmacopoeia Volume II, EP9.0 WATER, PURIFIED Pharmaceutical Packaging: Non-volatile residue item in extractables test of National Pharmaceutical Packaging Material Standard Food Contact Materials: GB 31604.8-2021, EN 1186-3:2002 method A, Standards and Specifications for Utensils, Containers and Packages of Korea Ministry of Health and Welfare chapter IV 2-8 Cigarette Tipping Paper: YQ/T 59-2015 Chemical Reagents: GB/T 9740-2008, ISO 759 Water Quality: GB 8538-2016, DZT0064.9-2021, GB/T 14415-2007, GB/T 5750.4-2006 Solid Samples: Extractables and Loss on Drying in Chinese Pharmacopoeia Volume IV, USP40-NF35<921> WATER DETERMINATION Specifications Item Technical Parameters Measuring Range 0 g ~ 80 g Balance Resolution 0.1 mg Balance Weighing Range 0 g ~ 220 g Constant Weight Tolerance 0.3 mg, adjustable Water Bath Temperature Range Ambient ~ 100℃ Oven Temperature Range Ambient ~ 125℃ Temperature Control Accuracy ±0.5℃ Number of Sample Positions 36 Evaporating Dish Volume 100 mL Gas Port Size Φ8 mm Overall Dimension 1200 mm(L) × 850 mm(W) × 1335 mm(H) Power Supply 220V,50Hz Rated Power 7000 W Operation System Windows 10 Pro 64-bit Features Dual-temperature Integrated Control System, Upgraded Automation Integrated workflow of water bath evaporation, drying, cooling and constant weight for automatic, efficient and precise testing. Adopts automatic feeding mechanism controlled by pneumatic valve with residual volume less than 0.1 mL, no waiting or manual attendance required. Built-in water bath with liquid level sensor for automatic water level detection, water filling, draining and temperature control. High-precision Imported Balances with Isolation Protection Equipped with 3 high-precision imported balances, constant weight of 0.3 mg can be achieved after two drying cycles. Balances are installed in a stable shield with water-circulation interlayer to keep stable temperature and humidity during weighing. High Throughput & Wide Compatibility 36 independent test stations with separate data output to meet high-throughput testing needs. Compatible with purified water, n-hexane, ethanol, acetic acid, chloroform and other organic solvents. Cooling & Recovery System for Efficient Solvent Recycling Built-in circulating water cooling pump maintains low chamber temperature. Eco-friendly, cooling down to room temperature within 30 min. Equipped with solvent recovery bottle, solvent recovery rate over 90%. Intelligent Operating System, Global Compliance Real-time display of weighing data, temperature and humidity curves; data is automatically saved for query. Designed in accordance with GMP annex for computerized systems, flexible parameter setting for different standards. Audit trail function for full data traceability, user permission management available. Supports multiple data output formats, electronic signature and online report approval. Laboratory Intelligent IoT Platform The instrument can connect to the IoT platform for network digital management. Authorized users can remotely log into the IoT platform, access the instrument software interface, manage test data and perform remote fault diagnosis. Application Image Application Field Description Purified Water Suitable for testing the non-volatile content of purified water and sterile water for injection in the pharmaceutical industry. Pharmaceutical Packaging Materials Suitable for the test of non-volatile matter items in the dissolution test of plastic and rubber pharmaceutical packaging materials. Food Packaging Materials Suitable for various food utensils, containers and food packaging films, cans or other various food tools, pipes and other products made of polyethylene, polystyrene, polypropylene, perchlorinated vinyl resin as raw materials in different food simulants. Determination of total migration after immersion. Cigarette Pack Materials Suitable for total migration test of cigarette tipping paper soaking solution. Chemical Reagent Suitable for the evaporation residue test of chemical reagents, such as ethanol, acetic acid, n-hexane, chloroform and other organic solvents whose boiling point is lower than 100℃. Domestic Water and Drinking Water, Industrial Water, Sewage Suitable for the total dissolved solids test of drinking water, drinking natural mineral water, groundwater, drinking water, swimming pool water, urban sewage, industrial boiler water, etc. Solid Samples, Pharmaceutical Particles Suitable for loss on drying, dry content or moisture testing of solid samples, such as hollow capsules, noncrystalline cellulose and other pharmaceuticals or other solid particles. Ready to upgrade your total migration and non-volatile residue testing workflow? Contact GBPI today for datasheet, quotation and professional testing solution. Click for Free Consultation

  GBB-C Vertical Heat Sealing Tester Product Introduction GBB-C vertical heat sealing tester accurately measures heat sealing temperature, time, pressure and other performance parameters of plastic stand-up pouches, paper-plastic composite pouches and metal composite pouches. Optimal sealing conditions can be confirmed by testing sealing characteristics of different packaging materials. Testing Principle Place sample on the lower support plate and adjust height properly. Set sealing temperature, time and pressure as required, then start the device. The upper fixture seals samples automatically according to preset parameters. Step on foot switch to complete sealing in manual mode. In automatic mode, cyclic sealing runs repeatedly following set duration. Compliance Standards QB/T 2358-1998, ASTM F 2029, YBB00122003-2015 Technical Parameters Temperature Range Room temperature ~ 250℃ Temperature Accuracy ±1℃ Sealing Time 0.1s ~ 99.99h Sealing Pressure 0~1 MPa Sealing Surface 300×5.5mm smooth cutter, lower rod with silicone pad Operation Mode Manual & Automatic, external cylinder Air Source Compressed air Overall Dimension 730×400×540 mm Weight 33.8kg Power 1200 W Power Supply AC 220V, 50Hz Product Features Independent Temperature Control Temperature sensors installed at the rear of sealing cutters, inner and outer cutters support separate temperature setting. Dual Optional Test Modes Automatic mode realizes efficient repetitive sealing; manual mode equipped with foot switch for safe and easy operation. Advanced Pneumatic Driving System Composed of pressure gauge, regulating valve and cylinder, air pressure can be precisely adjusted for stable and efficient sealing work. Comprehensive Customization Service Anti-stick coating upgrade available. Customizable shape, size and surface smoothness meet diversified research demands. Application Fields Plastic Stand-up Pouch Paper-plastic Stand-up Pouch Aluminized Stand-up Pouch Boxed Milk

Application It is to test the filtering efficiency of particulate protective masks and medical masks and to determine the resistance of ordinary fabrics and medical protective masks to the constant flow of airflow.

MC‑D Migration Test Cell: Professional Pre‑Treatment Solution for Food‑Contact Material Migration Test GBPI MC‑D Migration Test Cell for Food‑Contact Material Migration Pre‑Treatment Address: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, GuangzhouTel: +86 15820231129 | Official Website: www.gbpitester.com Product Introduction MC‑D Migration Test Cell is suitable for pre‑treatment of migration tests for food‑contact materials and products. It meets the requirements of GB 5009.156‑2016 and applies to all non‑volatile food simulants specified in GB/T 23296.1‑2009, GB 31604.1‑2015 and other relevant standards. It provides standardized test conditions to support safety assessment for food‑contact specimens, widely adopted by third‑party laboratories, food packaging manufacturers and research institutes. Executive Standards To ensure test repeatability and global recognition, MC‑D Migration Test Cell conforms to both Chinese national standards and European normative requirements: GB/T 23296.1‑2009, EN13130‑1:2004, GB 5009.156‑2016, GB 31604.1‑2015, EN1186‑1:2002. It satisfies migration pre‑treatment requirements for domestic inspection and EU export certification. Core Technical Parameters Contact Mode Single‑sided contact Contact Area 99.17 cm² Contact Surface Diameter Φ112.4 mm Volume 300 mL Operating Temperature 5℃ ~ 120℃ Product Features • Designed and manufactured with reference to Type‑D cell in Appendix C of EN1186‑1:2002, Type‑D cell in Appendix D of GB/T 23296.1‑2009 and Type‑D cell in Appendix D of EN13130‑1:2004, ensuring consistency of migration test results. • This migration cell supports both migration‑cell method and total‑immersion method to meet diverse pre‑treatment requirements. • Constructed of premium borosilicate glass featuring high hardness, high light transmittance and excellent chemical stability. It is heat‑resistant with low matrix content and will not interfere with the determination of overall migration and specific migration values. • Adjustable stainless‑steel latches enable simple operation and reliable sealing. It prevents burst under high‑temperature conditions with various food simulants, guaranteeing test safety and stable migration results. • For non‑reflux immersion, the opening can be sealed and fixed directly with glass plug to carry out total‑immersion tests at ambient and high temperatures. • For reflux immersion, a condensation reflux tube can be directly connected to the ground‑glass joint for migration testing. Application Fields It applies to migration test pre‑treatment of food‑contact materials and products exposed to food simulants including water, acetic acid and ethanol. Conclusion MC‑D Migration Test Cell is a standard‑compliant auxiliary device for food‑contact material safety testing. Made of high‑performance borosilicate glass, it supports both migration‑cell and total‑immersion approaches, compatible with non‑reflux and reflux immersion workflows. With safe anti‑burst performance under high‑temperature testing, it delivers repeatable migration pre‑treatment results for lab QC, third‑party testing institutes and packaging manufacturers. It is essential hardware for food‑contact material compliance assessment both for domestic market and European export business. Get Quotation for This Unit GBPI Packaging Test Equipment ManufacturerAddress: No.3 Linjiang Road, Xiagang Subdistrict, Huangpu District, Guangzhou, Guangdong, ChinaTel: +86 15820231129 | Official Website: www.gbpitester.com

AUTO GBDA-180 The Compost Degradation Tester is based on the gravimetric method for measuring carbon dioxide emissions. It is a professional use of small reactors to determine the final biodegradability of test materials. It is suitable for the biodegradability analysis of degradable plastics and bio-based materials such as lunch box garbage, waste ground film, plastics containing plasticizers and pigment additives, etc.

Used for face mask air flow resistance and differential pressure testing to check breathability and can also be used to check differential pressure of textile materials gas exchanger.

 GBM-D1 intelligent sealing performance tester uses the working principle of pressurizing the sample to test the sealing strength and integrity of packaging materials. It is suitable for food and medicine packaging materials such as flexible, rigid, porous and laminated aluminum foil. There are multiple test modes for comprehensive evaluation of the tightness and integrity of packaging materials. Wide applicability, complete functions and accessories, in line with applicable ASTM, ISO and GB standards. At the same time, our company provides matching accessories and services for different samples.