Professional Battery Diaphragm Test Equipment for lithium battery diaphragm air permeability, thickness & tensile strength testing. Stable performance for new energy battery manufacturing.

The tear tester (elemendorf method) tests the tear resistance of paper, film, PVC, polyolefin, polyester, composite film, sheet, non-woven fabric, textile, paper, and board, etc. It is controlled by computer automatically and can be tested independently.

This machine is used to test the compression, deformation resistance and stacking of corrugated carton, honeycomb board box and so on.

           

Automatic Evaporated Residues Tester is pplicable to tableware, food containers, packaging films, bags, cap sealing rubber pad, painted coating for inner wall of cans or tins, plant fiber container and so on

Torque tester HP-200 is a testing instrument for bottle cap locking and opening based on ASTM and GB standard requirements and market demand developed and manufactured by GBPI R&D team. For bottle packaging products, nozzle packaging products and tube packaging products, the size of the cap opening torque is one of the key control parameters, which has a great impact on the intermediate transportation and final consumption of the product.It is suitable for measuring the size of the locking and opening torque of bottle products, and is an indispensable test equipment in the production process.

Product introduction Fully automatic dual-channel linear type corner-spout sealing machine is professionally used for automatic casing and heat sealing of spouts and pouches. It is suitable for spouts of various diameters, lengths and models. As preferred automation equipment for corner spout packaging pouches, it is widely use in packaging of Laundry detergent, beverage, oil, edible oil, outdoor folding water pouches, etc. It can be customized to connect to the filling production line.

The respiratory resistance tester is suitable for determining the inhalation resistance and exhalation resistance under the regulations of respirators and masks, and for the related testing and inspection of ordinary mask products by the national labor protection equipment inspection agency manufacturer.

     

Vertical Counter‑Pressure Retort LS‑35L/50L/75L/100L | Dual‑Mode Sterilization for Food Packaging Aseptic Testing LS‑series Vertical Counter‑Pressure Retort for Food Packaging Sterilization & Laboratory Aseptic Validation Product Introduction Reliable dual‑mode counter‑pressure sterilizer tailored for food packaging quality control & lab aseptic evaluation. The vertical counter‑pressure retort is a medium‑small‑size mechanically program‑controlled counter‑pressure sterilization equipment. The sterilizer adopts electric heating mode. Water is directly injected into the sterilizing chamber and heated to generate high‑pressure steam required for sterilization to disinfect articles. After sterilization is completed, external compressed air and water pressure are applied for rapid cooling within 3 minutes, cooling internal articles down to 30‑40℃. Equipped with program control, it supports two operation modes: boiling disinfection and pressure sterilization with rapid cooling. Boiling temperature can be set ≤100℃. The rapid‑cooling pressure sterilization temperature is pre‑selectable within 101℃‑135℃. It is integrated with heater overload protection and buzzer alarm upon sterilization completion. Featuring simple operation and high safety reliability. This unit is suitable for disinfection and sterilization of food packaging, utensils and instruments. It is an ideal device especially for aseptic tests in food research institutions. Working Principle Dual‑sterilization logic enables boiling disinfection & high‑pressure counter‑pressure sterilization, simulating real‑world thermal processing conditions for flexible packaging samples. This equipment is designed with two disinfection & sterilization principles to deliver dual‑function performance for customers. The heater directly heats water to produce pressurized steam. The pressurized steam acts on microorganisms on samples and destroys their structures to realize sterilization. When rapid‑cooling sterilization program starts, 6 liters of tap water is first injected into the chamber. After around 25‑minute heating process, it enters sterilization holding stage with sterilization duration of 35‑40 minutes. When sterilization finishes, 0.24 MPa compressed air and tap‑water pressure are manually fed into the chamber, then half‑open the drain valve to discharge water and implement counter‑pressure cooling for flexible packages and other specimens. Rapid cooling lasts for 3 minutes. Manually cut‑off compressed air and tap‑water supply, and internal articles can be cooled down to 30‑40℃. Core Advantages Dual‑mode operation: boiling disinfection & counter‑pressure pressure sterilization Ultra‑fast 3‑minute counter‑pressure cooling to avoid flexible pouch deformation Heater overload protection & buzzer alarm when sterilization cycle completes Multiple chamber volume options:35L‑50L‑75L‑100L for different test throughput Mechanical program control, easy operation for laboratory staff Technical Parameters Item Specifications Max Working Pressure 0.22 MPa (30 Psi) Max Working Temperature 135℃ Sterilization Temperature Selection 101‑135℃ Boiling Temperature Selection ≤100℃ Timer Range 1‑60 min Effective Chamber Volume 35L, 50L, 75L, 100L Power / Power Supply 2.5 KW / AC220V, 50Hz; 3 KW / AC220V, 50Hz; 4.5 KW / AC220V, 50Hz Overall Dimension 570×550×970 mm(35L);590×590×1110 mm(50L);650×630×1150 mm(75L);680×650×1220 mm(100L) Gross / Net Weight 56/42 kg(35L); 68/50 kg(50L); 90/70 kg(75L); 105/85 kg(100L) Application Scenarios Widely adopted in food R&D laboratories, packaging manufacturers and quality inspection institutes for sterilization and thermal‑resistance assessment of flexible food packaging materials. Disinfection & sterilization for food flexible packaging, containers and lab utensils Aseptic test and thermal resistance evaluation for food packaging samples Sterilization for laboratory instruments and small‑batch food test specimens Get Custom Solution & Quotation GBPI Packaging Test EquipmentOfficial Website: www.gbpitester.com

packaging barrier film water vapor transmission rate test also called moisture transmission rate test and WVTR

  GX-C3S Printing Ink Rub Resistance Tester Product Introduction Designed per international standards, this tester detects abrasion resistance of printing ink layers and surface coatings. It accurately evaluates print rub resistance, ink adhesion and coating hardness to support quality control and material optimization. Test Principle Rub printed samples with clean offset paper under fixed load. After preset rub cycles, test specimen density and compare with initial value to calculate ink abrasion resistance. Applicable Standards ASTM D5264, TAPPI T830 Technical Parameters Item Specification Rubbing Load 8.9 N (2lb); 17.8 N (4lb) Rubbing Speed 10-200 cpm Rub Block 1(8.9N) 910g±10g Rub Block 2(17.8N) 1810g±10g Rub Mode Arc reciprocating motion Rub Cycles 1～999999 Specimen Quantity 2 pcs Overall Dimension 570mm×400mm×265mm(L×W×H) Power 600W Power Supply AC220V 50Hz Net Weight 24.5kg Product Features Equipped with color touch screen for easy parameter setting and operation. Fully automatic running, one-key start & auto stop for simple operation. High-precision ball screw ensures stable running, long service life and energy saving. High testing accuracy for reliable experimental results. Standard-compliant structure guarantees accurate test data. Built-in printer to output test reports directly. Arc reciprocating rub simulates real complex friction condition of practical usage. Adjustable rubbing cycles and rubbing speed. Overload protection: auto stop when load exceeds preset threshold. Application Fields Applied for printing packaging, plastic coating, surface finish industries, used to check ink layer wear and surface coating abrasion performance of printed products.