GBPI Optical Testing Equipment Haze Meter YH1200 General‑purpose Model Looking for technical specs, quotation or application guidance? Get complimentary support from our professional testing instrument specialists. Click for Free Consultation Introduction The YH1200 Haze Meter (general‑purpose model) easily performs total luminous transmittance and haze measurements in accordance with both the ASTM D1003 (non‑compensated) and ISO 13468 (compensated) standards. Its open sample compartment supports both vertical and horizontal testing, accommodating a wider variety of samples. Equipped with a PD array detector that conforms to the CIE V(λ) 2‑degree standard observer response, the YH1200 delivers highly accurate and repeatable transmittance and haze data through its compensated measurement method. Application YH1200 haze meter is widely used in glass processing, plastic processing, film, display screen processing, packaging industry, liquid medicine analysis, etc. Technical Advantages Dual Standards: ISO & ASTMDesigned to meet the testing requirements of various users, the instrument complies with the following standards: ASTM D1003/1044, ISO 13468, ISO 14782, GB/T 2410, JJF 1303‑2011, CIE 15.2, JIS K7105, JIS K7361, and JIS K 7136. Easy Operation for Faster, More Accurate MeasurementsThe YH1200 Haze Meter features a large touchscreen interface for simple and convenient operation. Equipped with a PD array detector that adheres to the CIE V(λ) 2‑degree visual response, it ensures high‑precision, repeatable measurements of transmittance and haze. It also includes a USB data output port for seamless integration with laboratory information systems. Dynamic MeasurementIntegrated with independent light source detectors and temperature sensors, the device continuously monitors the light source and environmental conditions, ensuring the reliability of test data. Compensation Port for Enhanced Measurement AccuracySupports both the non‑compensated method (ASTM D1003) and the compensated method (ISO 13468) for total luminous transmittance and haze testing, delivering highly accurate results. Versatile Measurement and Broad Sample CompatibilityThe open measurement area allows for both vertical and horizontal testing, accommodating a wide range of sample types. Quality Management SoftwareIncludes powerful software for the analysis of haze and transmittance measurements, ideal for quality control across various industries. The software enables digital data management on a PC, allowing users to compare haze and transmittance values, generate test reports, and customize data management workflows to suit specific operational needs. About GBPI GBPI (Guangzhou Biaoji Packaging Equipment Co., Ltd.) was founded in 2002 in Guangzhou Economic and Technological Development Zone. It is a comprehensive high‑tech enterprise integrating R&D, manufacturing and sales of packaging & optical testing instruments. We deliver complete testing solutions for packaging, food, pharmaceutical, new‑material and laboratory industries. GBPI owns CNAS‑authorized testing laboratory and reference‑material development center, supplying instrument hardware, third‑party sample testing and calibration services for global clients. Interested in YH1200 Haze Meter for your laboratory? Reach out to GBPI for datasheet, quotation and professional technical support. Click for Free Consultation

  GBPI Optical Testing Equipment Haze Meter BJ‑830 Universal Type Looking for technical specs, quotation or application guidance? Get complimentary support from our professional testing instrument specialists. Click for Free Consultation Introduction BJ‑830 haze meter (universal type) can easily implement ASTM D1003 non‑compensation method, ISO 13468 compensation method, full transmittance, haze test, and the open sample chamber can be used for vertical or horizontal testing to adapt to more samples being tested. BJ‑830 haze meter adopts PD array detector, which meets CIE V(λ) 2 degree visual response. The compensation method measurement can achieve high‑precision and repeatable light transmittance and haze data measurement. Application The BJ‑830 haze meter is widely used in fields such as glass processing, plastics processing, thin‑film production, display screen manufacturing, the packaging industry, and the analysis of liquid pharmaceutical solutions. Technical Advantages Compatible with both ASTM and ISO testing standards. Compliant with testing standards including GB/T 2410, ASTM D1003/1044, and ISO 13468/14782; includes a third‑party calibration/verification report. No warm‑up required—ready for immediate use, with results available in just 1.5 seconds. Supports haze and total luminous transmittance measurements under CIE‑A, CIE‑C, and CIE‑D65 standard illuminants. 21mm measurement aperture. Features an open measurement area, accommodating samples of any size. Supports both vertical and horizontal measurement orientations, suitable for samples such as sheets, films, and liquids. Equipped with an LED light source, offering a long service life—no replacement needed for ten years. Technical Specifications Item Parameter Details Model BJ‑830 Features Enables ASTM‑standard haze measurement (ASTM D1003/D1044) and transmittance measurement. Its open measurement area supports both vertical and horizontal testing. It is widely used for transmittance and haze testing in glass processing, plastics processing, film, display manufacturing, and packaging. Light Source CIE‑A,CIE‑C,CIE‑D65 Standards ASTM D1003/D1044,ISO13468/ISO14782,JIS K 7105,JIS K 7361,JIS K 7136,GB/T 2410‑08 Measurement Parameters Haze (HAZE) and transmittance (T) in accordance with ASTM standards Measurement Aperture 21mm Display 5‑inch TFT LCD Repeatability 0.08 Optical Geometry 0/D Measurement Range 0‑100% Resolution 0.01% Sample Size Thickness ≤ 145 mm Data Storage 20,000 data values Interface USB Power Supply DC12V/3V Operating Temperature 5–40°C; relative humidity 80% or lower (at 35°C), non‑condensing Storage Temperature ‑20–45°C; relative humidity 80% or lower (at 35°C), non‑condensing Dimensions L × W × H: 310 × 215 × 540 mm Weight 6kg Standard Accessories PC software (Haze QC) Optional Accessories Measurement fixtures, haze reference standards, and custom aperture plates About GBPI GBPI (Guangzhou Biaoji Packaging Equipment Co., Ltd.) was founded in 2002 in Guangzhou Economic and Technological Development Zone. It is a comprehensive high‑tech enterprise integrating R&D, manufacturing and sales of packaging & optical testing instruments. We deliver complete testing solutions for packaging, food, pharmaceutical, new‑material and laboratory industries. GBPI owns CNAS‑authorized testing laboratory and reference‑material development center, supplying instrument hardware, third‑party sample testing and calibration services for global clients. Interested in BJ‑830 Haze Meter for your laboratory? Reach out to GBPI for datasheet, quotation and professional technical support. Click for Free Consultation

Oxygen transmission rate (OTR) is the measurement of the amount of oxygen gas that passes through a substance over a given period. It is mostly carried out on non-porous materials, where the mode of transport is diffusion, but there are a growing number of applications where the transmission rate also depends on flow through apertures of some description.

It is suitable for the resistance of the mask to the penetration of synthetic blood under different levels of test pressure. The mask material is tested with synthetic blood under continuously applied pressure, and the penetration of synthetic blood on the material is visually checked.

W203 2.0 Water Vapor Transmission Rate Tester Electrolytic Method | High Barrier Materials WVTR Testing Product Introduction W203 2.0 is developed based on the electrolytic test principle, designed and manufactured in accordance with GB/T 21529, ISO 15106-3 and other international standards. It tests water vapor transmission rate of samples under controlled temperature and humidity, widely used for high barrier materials in LCD, solar cells, chip packaging, pharmaceuticals, food and more. Get a Free Quote Today   Test Principle W203 2.0 adopts the electrolytic method. The pre-treated sample is fixed in the test chamber, separating it into wet and dry sides. Humidified nitrogen flows on one side of the film, while dry nitrogen (carrier gas) flows on the other side at a fixed rate. Due to humidity gradient, water vapor permeates from the wet side to the dry side, carried by dry nitrogen to the electrolytic sensor. The WVTR value is calculated from the electrical signal output by the sensor.   Compliant Standards 2025 Chinese Pharmacopoeia 4010 GB/T 21529-2008 ISO 15106-3 DIN 53122-2 YBB 00092003-2015 ASTM F3299 JIS K7129-3   Technical Specifications Item Value Test Range 0.001~40 g/(m²·24h) (Film & Sheet) Resolution 0.0001 g/(m²·24h) Temperature Range 15 ~ 45℃ Temperature Accuracy ±0.1℃ Humidity Range 5 ~ 90%RH Humidity Accuracy ±1%RH Test Area 50.24 cm² Sample Size Φ100 mm Test Chambers 3 channels (independent data)   Key Features High-sensitivity sensor for ultra-high barrier materials in electronics, photovoltaics, displays. Automatic pneumatic clamping system, one-key locking, excellent sealing. Precise temperature & humidity control: ±0.1℃, ±1%RH. 3 independent test chambers for high-throughput testing. 11.6-inch HD touch screen, real-time test curves display. Intelligent OS with audit trail, multi-level user rights, GMP compliant. Calibrated with national standard substances for accurate & authoritative data.   Applications Display MaterialsLCD sealant, SiNx passivation film, modified PET, etc. Chip PackagingFR-4, BT resin, PI substrate, ABF film, ceramic substrate. Solar MaterialsSolar backsheet, butyl film, ALD Al₂O₃, EVA/POE film. Packaging ComponentsPharmaceutical tubes, BFS bottles, infusion hoses, containers. Pharmaceutical & FoodUltra-high barrier films and packages for medical and food use.

Didital thickness tester is used to make thickness measuring or comparative measuring of plastic film, thin sheet, paper and so on.

Product Introduction This portable diesel silent generator is designed for outdoor industrial emergency power supply. Adopting air - cooled four - stroke technology, it features stable performance, durability, strong power, high efficiency, intelligent protection, and low noise reduction, making it an ideal choice for various power - demanding scenarios. Product Parameters Name Details Model of Power 220 Rated Power 6.0kw (220V); 8.75kw (380V) Voltage 220V; 380V Fuel Tank Capacity 12.5L (220V); 15L (380V) Engine Oil Capacity 1.65L Weight 158kg Displacement 499cc Size 910530740mm Working Ambient Temperature ≤40°C Voltage Distortion Rate ≤10% DC Voltage 12V DC Current 8.3A Starting Method Electric start   Product Applications Industrial Power Generation Suitable for power supply in industrial factories, providing stable electricity to support production lines and various industrial equipment operations. Power for Aquaculture Can be used in aquaculture farms, ensuring continuous power for environmental control systems, feeding equipment, etc., to maintain the normal growth environment of aquatic products. Outdoor Construction Ideal for outdoor construction sites, supplying power for construction machinery, lighting, and other equipment, ensuring the smooth progress of construction projects.

  1.Profile Xenon lamp aging test chamber simulates the full spectrum lamp with Xenon arc lamp to reappear the destructive wave. It serves for the environmental simulation and accelerated test for research and development, product development and quality control. Besides, the chamber also applies to the choice of new material, weathering test after composition of material and improvement for the current material. It simulate different environment, and show the material changes under the explosion of sunlight.   The chamber meets the standard: GB/T16585-1996 , GB14522-93 , GB/T16422.3-97, ASTM D2565 and so on. The Chamber is to determine the color fastness, aging resistance of textiles, plastics, coatings, rubber products or other materials by objecting to the simulated conditions of nature weather (sun, rain, temperature and humidity, etc.).     Technical parameters   2.Material of construction u Full spectrum lamp u Optional filter system u Water spraying function u Humidity control u Temp. control system in the chamber u Sample fixed hold of irregular shape u USA imported xenon arc lamp u Easy installation and operation, seldom daily maintainance. u Service life time deepens on the irradiance level, usually 1600hrs. It’s easy to replace the lamp, with filter of long service life time to ensure the necessary spectrum. 3.Technical parameters Model No., equipment name GB-OXD-15P Xenon aging test chamber Interior sizes   W500×D500×H600mm  Exterior sizes W1050×D1050×H1750mm (or so) Temperature range 0℃～80℃ Controller imported programmable 7inch touch screen Machine components material inner and outer 304# stainless steel Sample holder Aluminum alloy frame base Protection device residual-current circuit breaker (RCCB) to control the warning for loop overload, thermal protection and water shortage protection. Temp. deflection ±2℃  (without lighting) Humidity range 30％～98％R.H Humid. deflection ±2.5%R.H(Humid.≥75%R.H); ±3%R.H(Humid.≤75%R.H) without lighting Light source imported full spectrum xenon arc lamp(average useful life 1600hrs) Raining time 1～9999min (adjustable) Raining period 1～240min, interval（cut）adjustable lamp power Test period for Temp., irradiation, condensation, spray can be adjustable Lamp 1.8KW Wave length range 290-800nm heating power (or so) 4.0KW humidification (or so) 2.0KW Light irradiance 1200w/m2 Distance between arc center and sample holder: 350～380mm Revolving speed of sample holder ≥1r/min  water spray period a. spray time: 0～99h59min (Continuing or adjustable) b. stop time: 0～99h59min, (Continuing or adjustable)   lighting time Continuing programming control available black panel temp. 85±3℃ cooling method Mechanical wind cooling; Room temp. less than 26℃ is recommend, relative humid: ≤85%R.H; humid. and temp. tested after 2 hours under idle condition. 4.Temperature & humidity running control system controller imported programmable 7inch touch screen precision range set precision: temp. ±0.1℃, humid: ±2％R.H, indicated precision: temp.±0.1℃,humid.: ±1％R.H temp. & humid. sensor Platinum Resistance(PT100Ω/MV) black panel temp. double-metal black panel temp. thermometer water-supplying system auto-control humidication water-supplying, Xenon arc lamp with cycling cooling water circulation system low noise heat-resistance conditioning motor, multi-blade centrifugal wind wheel control system mainly consists of operation panel, central controller, kinds of key-pressing sw., status indicating lamp, excution electric device etc.. 5.Structure section of machine body The chamber consists of several section: chamber body, control system, refrigeration system, heating system, humidation system, wind system, raining system, lighting system and so on. Chamber body a. With integrated structure, the chamber consists of up left part as working room, up right part as electric controller which is convenient to control, down part as compressor cooling group, sample holder rotation device, Xenon lamp condensation water box, water pump and other executive devices. b. Inner wall of chamber adopts international SUS304# material. c. Temp. insulation material is polyurethane foam and ultra-fine fibre glass, with good temp. insulation result, no frost and condensation on the external surface of chamber. d. condensate water outfall set at the bottom of chamber e. Environmental heat-resistance silicon sealing tape as the material of door frame. f. Viewing window with eye-protective film on its surface to protect eyes from being injured by Xenon lamp. external chamber body a. Seal of door adopts the double-layer of refined silicone rubber with reliable sealing effect and no aging or hardening phenomenon under high or low temperature. b. Single door (embedded handle); c. Viewing window, antifrost device and lamp equipped on the door viewing window Size：25 cm W × 30 cm H；equipped with Anti-radiation hollow glass 6.Electric control section of chamber a. As the core part of chamber b. Air pressure switch as the main switch to control the main circuit; c. Safety measures for electric section: it warns and cut electricity automatically after tested the action from following protection devices: a) overheat protection in working room b) lockage of phase, leakage protection c) overcurrent protection of motor d) overpressure/overload protection of cooling machine e) short out/overload protection of heater, humidifer f) fusing protection of fuse 7.Working section of chamber Condensation section of compressor. a.Cooling system: as the core part of cooling system, we adopt one set of compressor of Tecumseh from France in this case to ensure the cooling requirement in the working room. b.For adjustment technology and design of cooling system, we take an efficiency processing way to ensure the adjustment for the cooling amount and consumption of cooling system under the normal running, to make the failure rate down to the economical statue. c.Cooling evaporator: it locates in interlayer at one side of chamber which ventilate by force from blast motor to exchange heat fast. d.Cooling method of cooling system: forced air cooling Cooling refrigerant：Environmental R404a； Heating system a. Heating method: heating directly in the chamber; b. Military level stainless steel heating tube used, with fast and stable heating to keep temperature in the working room from rapid change. It with corrosion resistance, anti-high-low temperature, no leakage and other advantages. c. With SSR (solid relay)output control, without noise, reliable working, long service life time, fast switching, low interference from outside, and easy operation etc.. Rain system.   it consists of nozzle, solenoid valve, water-supplying and connecting pipe. Lighting system. It consists of xenon lamp, lamp cover, lamp contactor and other controlling parts. Energy compensation is got by adjusting samples distance, pressure and current. Wind system  It locates in the interlayer at the back of chamber, there are heater, fan blade, evaporator, PT100 temperature samples sensor etc.. when wind machine running, the air is intaken to the channel from working room, and blow out from the bottom after cooled; the air exchanged in the working room with samples is intaken again to the channel and mix; after several circulation, it will reach the purposed temperature, and ensure the high index of temp. and humid in the chamber at the same time. Cooling dehumidification system take the compressor of world brand Tecumseh from France to keep constant temperature, decrease the humidity in the working room and cool the xenon lamp. Humidification Steam generator: to generate steam from water Water level control: control the water inlet by solenoid valve, and water level by liquid level switch to provide the signal for water-supply and warning. Air circulation section Cycling channel and winding machine inside the chamber, it uses the high efficiency cooling machine and energy adjusting system, efficiency heat exchange to reach the aim of temperature change, which also improves the airflow and heat exchange between airflow, heating and humidification, as a result, it improves the humidity uniformity in the working room. 8. Enclosured files: operation manual, warranty card 9. Machine running requirements Temp. 5℃~+32℃ Humidity ≤85% Power supply AC220（±10%）V/50HZ    10. Core components parts Remark: replacement of some small parts of the same quality is possible because of material shortage.    

Accelerated weathering tests are performed on materials by simulating ultraviolet radiation and condensation in natural sunlight to obtain results on material weathering resistance. It can simulate environmental conditions such as ultraviolet, rain, high temperature, high humidity, condensation, and darkness in natural climates. By reproducing these conditions, it can be combined into a cycle and allowed to automatically complete the cycle as required.

Torque tester HP-200 is a testing instrument for bottle cap locking and opening based on ASTM and GB standard requirements and market demand developed and manufactured by GBPI R&D team. For bottle packaging products, nozzle packaging products and tube packaging products, the size of the cap opening torque is one of the key control parameters, which has a great impact on the intermediate transportation and final consumption of the product.It is suitable for measuring the size of the locking and opening torque of bottle products, and is an indispensable test equipment in the production process.

This product is based on the testing principle of the coulometric sensor method testing Oxygen, and is designed and manufactured with reference to ASTM D3985 and other standards. Adopting high-precision imported oxygen sensor, high test accuracy,it is suitable for oxygen transmission performance testing of films, sheets, paper, packaging and related materials in the fields of food, medicine, medical equipment, daily chemicals, photovoltaic electronics, etc., and provides a wide range and high-efficiency oxygen transmission rate detection for high, medium and low oxygen barrier materials.

The tear tester (elemendorf method) tests the tear resistance of paper, film, PVC, polyolefin, polyester, composite film, sheet, non-woven fabric, textile, paper, and board, etc. It is controlled by computer automatically and can be tested independently.