Heat Seal Tester is to test the temperature, pressure, and time for heat sealing of various film materials.

 plastic film, food and drug manufacturer, the scientific research and teaching experiment of testing institutions and schools    

Heat Seal Analyzer widely used in industries of plastic films, food, pharmaceuticals, inspection agency, research institute and so on,it is to test the temperature, pressure, and time for heat sealing of various film materials.    

  GBB-C Vertical Heat Sealing Tester Product Introduction GBB-C vertical heat sealing tester accurately measures heat sealing temperature, time, pressure and other performance parameters of plastic stand-up pouches, paper-plastic composite pouches and metal composite pouches. Optimal sealing conditions can be confirmed by testing sealing characteristics of different packaging materials. Testing Principle Place sample on the lower support plate and adjust height properly. Set sealing temperature, time and pressure as required, then start the device. The upper fixture seals samples automatically according to preset parameters. Step on foot switch to complete sealing in manual mode. In automatic mode, cyclic sealing runs repeatedly following set duration. Compliance Standards QB/T 2358-1998, ASTM F 2029, YBB00122003-2015 Technical Parameters Temperature Range Room temperature ~ 250℃ Temperature Accuracy ±1℃ Sealing Time 0.1s ~ 99.99h Sealing Pressure 0~1 MPa Sealing Surface 300×5.5mm smooth cutter, lower rod with silicone pad Operation Mode Manual & Automatic, external cylinder Air Source Compressed air Overall Dimension 730×400×540 mm Weight 33.8kg Power 1200 W Power Supply AC 220V, 50Hz Product Features Independent Temperature Control Temperature sensors installed at the rear of sealing cutters, inner and outer cutters support separate temperature setting. Dual Optional Test Modes Automatic mode realizes efficient repetitive sealing; manual mode equipped with foot switch for safe and easy operation. Advanced Pneumatic Driving System Composed of pressure gauge, regulating valve and cylinder, air pressure can be precisely adjusted for stable and efficient sealing work. Comprehensive Customization Service Anti-stick coating upgrade available. Customizable shape, size and surface smoothness meet diversified research demands. Application Fields Plastic Stand-up Pouch Paper-plastic Stand-up Pouch Aluminized Stand-up Pouch Boxed Milk

GBB-F1 Heat Seal Tester is to test the temperature, pressure, and time for heat sealing of various film materials. It is applied to quality inspection organizations, drug control institutions, research institutes, packaging, thin film, food companies, pharmaceutical enterprises, personal care industry and so on.

N500 Gas Permeability Analyzer to test the gas (O2, N2, CO2 etc) transmission rate (GTR) of packaging materials, films and sheets materials

GBPI Melt Flow Indexer is used to measure thermoplastic melt mass flow rate (MFR) and melt volume flow rate (MVR). It is suitable to meassure meltg flow charactor of PP,PE,POM, AR,PC,ABS plastic and plastic productions, widely used in plastic raw materials production, petrochemcial industry, scientific research departments and commodity inspection department.

Glass Bottle Internal Pressure Tester is suitable for the internal pressure test of all kinds of beer bottles, wine bottles, beverage bottles, infusion bottles, antibiotic vials, etc. instrument meets the requirements of the holding pressure test and explosive pressure test of any size of bottles. The internal pressure test machine for glass bottles is used by breweries, glass bottle manufacturers, testing agencies and pharmaceutical manufacturers

For disinfection of large spaces. Removable aerosol disinfection and sterilization equipment, manual and automatic control, timing and quantitative spraying, adjustable spray volume Suitable for hospitals, campuses, stations, airports, and other large public places. Under the action of compressed air, the medicinal solution is spouted from the nozzle to form aerosol ions of 2 to 10 μm, which quickly and fully integrates in the ambient air; kills pathogenic microorganisms in the air, and realizes a full range of dead space-free disinfection of the environmental space. Sterile environment. The sterilized objects will not form dew condensation and form droplets.

Product introduction This product is based on the test principle of cup method water vapor transmission, and is designed and manufactured according to ASTM E96, GB/T 1037 standards, and provides a wide range and high efficiency water vapor transmission rate detection for low, medium and high water vapor barrier materials. test. It is suitable for the water vapor transmission performance test of films, sheets, paper, fabrics, non-woven fabrics and related materials in the fields of food, medicine, medical equipment, daily chemicals, etc.

LC-1 Tensile Test Sample Cutter cuts samples of plastic film, paper and so on in preparation for other tests, such as tensile, peeling, tearing and heat sealing etc. It is compactly structured and easy to use. The edges of sample cut out are even and smooth.

  GQ-D1 Drop Ball Impact Tester High Precision Impact Resistance Tester for Packaging PRODUCT PROFILE GQ-D1 Drop Ball Impact Tester is mainly used for testing the impact resistance of hard sheets for food packaging and solid pharmaceutical hard sheets. Traditional electromagnets generate high temperature and residual magnetism after power off, affecting accuracy. This instrument adopts the principle of electromagnetic repulsion, which can automatically release residual magnetism and avoid high temperature, ensuring experimental accuracy. It features high-precision control, intelligent operation and complete safety protection, widely applied in food and pharmaceutical packaging quality control. TEST PRINCIPLE Place the test product on the test bench. Let a steel ball of specified weight fall freely from a specified height to impact the product. Then check the product's appearance for damage and various performance indicators. COMPLIANCE STANDARDS GB/T 15267 YBB 0021-2005 YBB 00202005 YBB 00222005-2015 TECHNICAL PARAMETERS Item Parameter Impact Height 0~900 mm Steel Ball Φ23mm (50g), Φ25mm (60g), Φ28.6mm (100g), Φ38.1mm (225g) Clamping Range 120mm × 85mm Sample Size 150mm (L) × 50mm (W) Dimensions 325 × 550 × 1341mm Weight & Power 30kg, 75W, AC 220V 50Hz PRODUCT FEATURES Touch Screen Control Color touch screen for intuitive and easy operation. Anti-Residual Magnetism Electromagnetic repulsion principle, no residual magnetism or high temperature. Pneumatic Clamping Auto clamping/release reduces error and test time. Built-in Printer Instant test report printing and data query. Intelligent Test Intelligent testing process, greatly improve work efficiency. Accurate & Reliable Stable structure and accurate test results. APPLICATIONS Food Packaging Hard Sheets For PVC hard sheets in food packaging, quality control for food & packaging enterprises. Solid Pharmaceutical Hard Sheets For pharmaceutical hard sheets, quality control for pharmaceutical & packaging enterprises. © 2025 GBPI | GQ-D1 Drop Ball Impact Tester | Professional Testing Solution